E32DC200F Datasheet, PDF (32/67 Pages) Omron Electronics LLC – These Fibers Units can be used in a variety of applications, such as detecting the presence of workpieces and positioning.

Fiber Units with Reflective Sensors Environment-resistant models
High-resolution mode
Standard mode
(
High-speed mode
*When used in combination with the E3X-DA-S Amplifier Unit (general-purpose).
Super-high-speed mode)
Type
Appearance (mm) *3
Dimen-
sions
page
Sensing distance (mm) *1
Min.
(Min. sensing bending
object) (mm) *2 radius
(mm)
Features
Model num-
ber
150°C
*4
56
M6
400
230
160 (72)
R35
Heat resistant
up to 150°C
E32-D51
200°C
*5
56
M6
350°C
*5
56
M6
400°C
*5
M4 _{1.25 dia.}
Min. bending radius
56
of sleeve: 10
56
6 dia.
7 dia.
56
150
90
60 (27)
100
60
40 (18)
160
95
65 (30)
70
40
30 (10)
(0.005 dia.)
(0.005 dia.)
R10
Heat resistant E32-D81R-S
up to 200°C E32-D81R*6
Heat resistant E32-D61-S
up to 350°C E32-D61*6
R25
Heat resistant
up to 400°C,
with sleeve
E32-D73-S
E32-D73*6
Fluororesin
cover, long
distance
E32-D12F
R40
Fluororesin
cover, side-
view
E32-D14F
*1. The sensing distances are for white paper.
*2. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set
to optimum values.
*3.
Indicates models that allow free cutting.
*4. For continuous operation, use the products within a temperature range of −40°C to 90°C.
*5. The maximum temperature that can be withstood varies with the location. Refer to dimensions diagrams for details.
*6. Order the Fiber Unit based on the Amplifier Unit. Use the E32-D@-S if the E3X-DA@-S, E3X-MDA@, or E3X-DAC@-S is used. Use the E32-D@ if any other Amplifier
is used.
Flexible Break-resistant Fluororesin coating
32