E32DC200F Datasheet, PDF (23/67 Pages) Omron Electronics LLC – These Fibers Units can be used in a variety of applications, such as detecting the presence of workpieces and positioning.

Special-beam models
High-resolution mode
Standard mode
(
Dimen-
Type Appearance (mm) *2 sions
page
High-speed mode
*When used in combination with the E3X-DA-S Amplifier Unit (general-purpose).
Super-high-speed mode)
Sensing distance (mm)
Standard object Min. bend-
(min. sensing ing radius
object) (mm)*1 (mm)
Features
Model number
1 dia.
3 dia. 0.5 dia.
Sleeve cannot be bent.
3 dia. 0.25 dia.
Sleeve cannot be bent.
3 dia. 0.22 dia.
Sleeve cannot be bent.
3 dia.
3.5 dia.
160
44
130
75 (30)
53
44
44
25 (10)
12
44
10
6 (4)
6
44
5
3 (2)
44
44
0.5 dia.
(0.005 dia.)
0.25 dia.
(0.005 dia.)
0.125 dia.
(0.005 dia.)
0.1 dia.
(0.005 dia.)
R
1-dia. cylinder,
flexible fiber
E32-T223R
R1
0.5-dia.
sleeve; 0.25-
dia. opening
E32-T33-S5
0.25-dia.
R10 sleeve, 0.125- E32-T333-S5
dia. opening
0.22-dia.
sleeve, 0.1-
dia. opening
E32-T334-S5
2,500
1.7 dia.
1,900
(0.1 dia.)
1,250 (500)
3-dia. cylinder E32-T22S
R10
1,750
1,300
870 (350)
2 dia. (0.1 dia.)
3.5-dia. cylin-
der, side-view
E32-T24S
45
11
45
45
11
45
1,100
840
560 (220)
1,500
1,100
750 (300)
980
750
480 (190)
1,300
1,000
650 (260)
(0.2 dia.) *3
R
E32-T16PR
R1 ^{Area width:}
11 mm
R10
E32-T16P
R
E32-T16JR
Area width:
R1 _{11 mm; side-}
view
R10
E32-T16J
44
30
44
45
10
44
M3
1,700
1,300
850 (340)
2,300
1,800
1,150 (450)
(0.3 dia.) *3
R
E32-T16WR
R1 ^{Area width:}
30 mm
R10
E32-T16W
3,700
2,800
(0.6 dia.) *4
Area width:
10 mm; long E32-T16
1,850 (740)
distance
R25
750
Multi-point de-
610
2 dia. (0.1 dia)
tection (4-
E32-M21
350 (140)
head)
*1. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set
to optimum values.
*2.
Indicates models that allow free cutting.
*3. This is the value for which detection is possible within the sensing area, with the sensing distance set to 300 mm. (The sensing object is stationary.)
*4. This is the value for which detection is possible within the sensing area, with the sensing distance set to give a digital value of 1,000. (The sensing object is sta-
tionary.)
23