GTL2010 Datasheet, PDF (8/20 Pages) NXP Semiconductors – 10-bit GTL Processor Voltage Clamp

NXP Semiconductors
GTL2010
10-bit bidirectional low voltage translator
9. Limiting values
Table 7. Limiting values^[1]
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter
Conditions
Min
V_SREF
V_DREF
V_GREF
V_Sn
V_Dn
voltage on pin SREF
voltage on pin DREF
voltage on pin GREF
voltage on port Sn
voltage on port Dn
[2] _−0.5
[2] _−0.5
[2] _−0.5
[2] _−0.5
[2] _−0.5
I_REFK
diode current on reference pins V_I < 0 V
-
I_SK
diode current Port Sn
V_I < 0 V
-
I_DK
diode current Port Dn
V_I < 0 V
-
I_MAX
clamp current per channel
channel in
-
ON-state
T_stg
storage temperature
−65
Max Unit
+7.0 V
+7.0 V
+7.0 V
+7.0 V
+7.0 V
−50
mA
−50
mA
−50
mA
±128 mA
+150 °C
[1] The performance capability of a high-performance integrated circuit in conjunction with its thermal
environment can create junction temperatures which are detrimental to reliability. The maximum junction
temperature of this integrated circuit should not exceed 150 °C.
[2] The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings
are observed.
10. Recommended operating conditions
Table 8. Recommended operating conditions
Symbol Parameter
Conditions
Min Typ Max Unit
V_I/O
V_SREF
V_DREF
V_GREF
I_PASS
T_amb
voltage on an input/output pin Sn, Dn
0
-
voltage on pin SREF
[1] ₀
-
voltage on pin DREF
0
-
voltage on pin GREF
0
-
pass transistor current
-
-
ambient temperature
operating in free air
−40 -
5.5 V
5.5 V
5.5 V
5.5 V
64 mA
+85 °C
[1] V_SREF ≤ V_DREF − 1.5 V for best results in level shifting applications.
GTL2010_6
Product data sheet
Rev. 06 — 3 March 2008
© NXP B.V. 2008. All rights reserved.
8 of 20