GTL2010 Datasheet, PDF (11/20 Pages) NXP Semiconductors – 10-bit GTL Processor Voltage Clamp

NXP Semiconductors
GTL2010
10-bit bidirectional low voltage translator
12.2 Dynamic characteristics for CBT-type application
Table 11. Dynamic characteristics
T_amb = −40 °C to +85 °C; V_GREF = 5 V ± 0.5 V; GND = 0 V; C_L = 50 pF; unless otherwise specified. Refer to Figure 10.
Symbol Parameter
Conditions
Min
Typ
Max
Unit
t_PD
propagation delay
[1] _-
-
250
ps
[1] This parameter is warranted but not production tested. The propagation delay is based on the RC time constant of the typical ON-state
resistance of the switch and a load capacitance of 50 pF, when driven by an ideal voltage source (zero output impedance).
input
output
1.5 V
t_PLH
1.5 V
1.5 V
t_PHL
3.0 V
0V
V_OH
1.5 V
V_OL
002aab664
Fig 8.
t_PD = the maximum of t_PLH or t_PHL.
V_M = 1.5 V; V_I = GND to 3.0 V.
Input (Sn) to output (Dn) propagation delays
GTL2010_6
Product data sheet
Rev. 06 — 3 March 2008
© NXP B.V. 2008. All rights reserved.
11 of 20