GTL2010 Datasheet, PDF (17/20 Pages) NXP Semiconductors – 10-bit GTL Processor Voltage Clamp

NXP Semiconductors
GTL2010
10-bit bidirectional low voltage translator
temperature
maximum peak temperature
= MSL limit, damage level
minimum peak temperature
= minimum soldering temperature
peak
temperature
time
001aac844
MSL: Moisture Sensitivity Level
Fig 13. Temperature profiles for large and small components
For further information on temperature profiles, refer to Application Note AN10365
“Surface mount reflow soldering description”.
16. Abbreviations
Table 15. Abbreviations
Acronym
Description
CDM
Charged Device Model
CMOS
Complementary Metal Oxide Semiconductor
DUT
Device Under Test
ESD
ElectroStatic Discharge
GTL
Gunning Transceiver Logic
HBM
Human Body Model
I²C-bus
Inter IC bus
LVTTL
Low Voltage Transistor-Transistor Logic
MM
Machine Model
NMOS
Negative-channel Metal Oxide Semiconductor
TTL
Transistor-Transistor Logic
TVC
Transceiver Voltage Clamps
GTL2010_6
Product data sheet
Rev. 06 — 3 March 2008
© NXP B.V. 2008. All rights reserved.
17 of 20