English
Language : 

COP410L Datasheet, PDF (18/20 Pages) National Semiconductor (TI) – Single-Chip N-Channel Microcontrollers
Option List (Continued)
Option 17 G0 I O Port
e 0 Standard output
e 1 Open-drain output
Option 18 G1 I O Port
same as Option 17
Option 19 G2 I O Port
same as Option 17
Option 20 G3 I O Port (no option available for COP411L)
same as Option 17
Option 21 D3 Output (no option available for COP411L)
e 0 Very-high sink current standard output
e 1 Very-high sink current open-drain output
e 2 High sink current standard output
e 3 High sink current open-drain output
e 4 Standard LSTTL output (fanout e 1)
e 5 Open-drain LSTTL output (fanout e 1)
Option 22 D2 Output (no option available for COP411L)
same as Option 21
Option 23 D1 Output
same as Option 21
Option 24 D0 Output
same as Option 21
Option 25 L Input Levels
e 0 Standard TTL input levels (‘‘0’’ e 0 8V ‘‘1’’ e 2 0V)
e 1 Higher voltage input levels (‘‘0’’ e 1 2V ‘‘1’’ e 3 6V)
Option 26 G Input Levels
same as Option 25
Option 27 SI Input Levels
same as Option 25
Option 28 COP Bonding
e 0 COP410L (24-pin device)
e 1 COP411L (20-pin device)
e 2 Both 24- and 20-pin versions
TEST MODE (NON-STANDARD OPERATION)
The SO output has been configured to provide for standard
test procedures for the custom-programmed COP410L
With SO forced to logic ‘‘1’’ two test modes are provided
depending upon the value of SI
a RAM and Internal Logic Test Mode (SI e 1)
b ROM Test Mode (SI e 0)
These special test modes should not be employed by the
user they are intended for manufacturing test only
Option Table
The following option information is to be sent to National along with the EPROM
Option Data
OPTION 1 VALUE e
0
OPTION 2 VALUE e
OPTION 3 VALUE e
OPTION 4 VALUE e
OPTION 5 VALUE e
OPTION 6 VALUE e
OPTION 7 VALUE e
OPTION 8 VALUE e
OPTION 9 VALUE e
0
OPTION 10 VALUE e
OPTION 11 VALUE e
OPTION 12 VALUE e
OPTION 13 VALUE e
OPTION 14 VALUE e
IS GROUND PIN
IS CKO PIN
IS CKI INPUT
IS RESET INPUT
IS L(7) DRIVER
IS L(6) DRIVER
IS L(5) DRIVER
IS L(4) DRIVER
IS VCC PIN
IS L(3) DRIVER
IS L(2) DRIVER
IS L(1) DRIVER
IS L(0) DRIVER
IS SI INPUT
Option Data
OPTION 15 VALUE e
OPTION 16 VALUE e
OPTION 17 VALUE e
OPTION 18 VALUE e
OPTION 19 VALUE e
OPTION 20 VALUE e
OPTION 21 VALUE e
OPTION 22 VALUE e
OPTION 23 VALUE e
OPTION 24 VALUE e
OPTION 25 VALUE e
OPTION 26 VALUE e
OPTION 27 VALUE e
OPTION 28 VALUE e
IS SO DRIVER
IS SK DRIVER
IS G0 I O PORT
IS G1 I O PORT
IS G2 I O PORT
IS G3 I O PORT
IS D3 OUTPUT
IS D2 OUTPUT
IS D1 OUTPUT
IS D0 OUTPUT
IS L INPUT LEV-
ELS
IS G INPUT LEV-
ELS
IS SI INPUT LEV-
ELS
IS COPS BOND-
ING
18