|
SM5010_06 Datasheet, PDF (5/25 Pages) Nippon Precision Circuits Inc – Crystal Oscillator Module ICs | |||
|
◁ |
SM5010 series
FUNCTIONAL DESCRIPTION
Standby Function
5010AHÃ, AKÃ, ANÃ, BHÃ, BKÃ, BNÃ, DNÃ, FNÃ, FHÃ, HNÃ, HKÃ series
When INHN goes LOW, the output on Q becomes high impedance, but internally the oscillator does not stop.
5010CLÃ series
When INHN goes LOW, the oscillator stops and the oscillator output on Q becomes high impedance.
5010EAÃ series
When INHN goes LOW, the oscillator stops and the oscillator output on Q becomes LOW.
Version
AHÃ, AKÃ, ANÃ, BHÃ,
BKÃ, BNÃ, DNÃ, FHÃ,
FHÃ, HNÃ, HKÃ series
CLÃ series
EAÃ series
INHN
HIGH (or open)
LOW
HIGH (or open)
LOW
HIGH (or open)
LOW
Q
Any fO, fO/2, fO/4, fO/8 or fO/16 output frequency
High impedance
Any fO, fO/2, fO/4, fO/8 or fO/16 output frequency
High impedance
Either fO or fO/2 output frequency
LOW
Oscillator
Normal operation
Normal operation
Normal operation
Stopped
Normal operation
Stopped
Power-saving Pull-up Resistor (CL series only)
The INHN pull-up resistance changes in response to the input level (HIGH or LOW). When INHN goes LOW
(standby state), the pull-up resistance becomes large to reduce the current consumption during standby.
SEIKO NPC CORPORATION â5
|
▷ |