SM5010_06 Datasheet, PDF (18/25 Pages) Nippon Precision Circuits Inc – Crystal Oscillator Module ICs

SM5010 series
5010EA× series
3V operation/Duty level: CMOS
V_DD = 2.7 to 3.6V, V_SS = 0V, Ta = −10 to +70°C unless otherwise noted.
Parameter
Symbol
Condition
Rating
Unit
min
typ
max
Output rise time
t_r1 Measurement cct 6, load cct 1, C_L = 15pF, 0.1V_DD to 0.9V_DD
–
Output fall time
t_f1 Measurement cct 6, load cct 1, C_L = 15pF, 0.9V_DD to 0.1V_DD
–
Output duty cycle¹
Duty
Measurement cct 6, load cct 1, V_DD = 3.0V, Ta = 25°C,
C_L = 15pF, f = 30MHz
40
Output disable delay time² t_{PLZ Measurement cct 7, load cct 1, VDD = 3.0V, Ta = 25°C,}
–
Output enable delay time² t_PZL ^{CL = 15pF}
–
8
16
ns
8
16
ns
–
60
%
–
100
ns
–
100
ns
1. The duty cycle characteristic is checked the sample chips of each production lot.
2. Oscillator stop function is built-in. When INHN goes LOW, normal output stops. When INHN goes HIGH, normal output is not resumed until after the
oscillator start-up time has elapsed.
5V operation/Duty level: CMOS
V_DD = 4.5 to 5.5V, V_SS = 0V, Ta = −40 to +85°C unless otherwise noted.
Parameter
Symbol
Condition
Rating
Unit
min
typ
max
Output rise time
Output fall time
Output duty cycle¹
Output disable delay time²
Output enable delay time²
t_r1
t_r2
t_f1
t_f2
Duty1
Duty2
t_PLZ
t_PZL
Measurement cct 6, load cct 1,
0.1V_DD to 0.9V_DD
Measurement cct 6, load cct 1,
0.9V_DD to 0.1V_DD
Measurement cct 6, load cct 1,
V_DD = 5.0V, Ta = 25°C, C_L = 15pF
C_L = 15pF
C_L = 50pF
C_L = 15pF
C_L = 50pF
f = 30MHz
f = 40MHz
Measurement cct 7, load cct 1, V_DD = 5.0V, Ta = 25°C,
C_L = 15pF
–
5
10
ns
–
13
26
–
5
10
ns
–
13
26
45
–
55
%
40
–
60
–
–
100
ns
–
–
100
ns
1. The duty cycle characteristic is checked the sample chips of each production lot.
2. Oscillator stop function is built-in. When INHN goes LOW, normal output stops. When INHN goes HIGH, normal output is not resumed until after the
oscillator start-up time has elapsed.
SEIKO NPC CORPORATION —18