SM5010_06 Datasheet, PDF (17/25 Pages) Nippon Precision Circuits Inc – Crystal Oscillator Module ICs

SM5010 series
5010CL× series
3V operation/Duty level: CMOS
V_DD = 2.7 to 3.6V, V_SS = 0V, Ta = −20 to +80°C unless otherwise noted.
Parameter
Symbol
Condition
Rating
Unit
min
typ
max
Output rise time
t_{r1 Measurement cct 6, load cct 1,}
t_r4
0.1V_DD to 0.9V_DD
C_L = 15pF
C_L = 30pF
Output fall time
t_{f1 Measurement cct 6, load cct 1,}
t_f4
0.9V_DD to 0.1V_DD
C_L = 15pF
C_L = 30pF
Output duty cycle¹
Duty
Measurement cct 6, load cct 1, V_DD = 3.0V, Ta = 25°C,
C_L = 15pF, f = 30MHz
Output disable delay time² t_{PLZ Measurement cct 7, load cct 1, VDD = 3.0V, Ta = 25°C,}
Output enable delay time² t_PZL ^{CL = 15pF}
–
2.0
4.0
ns
–
3.0
6.0
–
2.0
4.0
ns
–
3.0
6.0
45
–
55
%
–
–
100
ns
–
–
100
ns
1. The duty cycle characteristic is checked the sample chips of each production lot.
2. Oscillator stop function is built-in. When INHN goes LOW, normal output stops. When INHN goes HIGH, normal output is not resumed until after the
oscillator start-up time has elapsed.
5V operation/Duty level: CMOS
V_DD = 4.5 to 5.5V, V_SS = 0V, Ta = −40 to +85°C unless otherwise noted.
Parameter
Symbol
Condition
Rating
Unit
min
typ
max
Output rise time
t_{r1 Measurement cct 6, load cct 1,}
t_r2
0.1V_DD to 0.9V_DD
C_L = 15pF
C_L = 50pF
Output fall time
t_{f1 Measurement cct 6, load cct 1,}
t_f2
0.9V_DD to 0.1V_DD
C_L = 15pF
C_L = 50pF
Output duty cycle¹
Duty
Measurement cct 6, load cct 1, V_DD = 5.0V, Ta = 25°C,
C_L = 50pF, f = 30MHz
Output disable delay time² t_{PLZ Measurement cct 7, load cct 1, VDD = 5.0V, Ta = 25°C,}
Output enable delay time² t_PZL ^{CL = 15pF}
–
1.5
3.0
ns
–
4.0
8.0
–
1.5
3.0
ns
–
4.0
8.0
40
–
60
%
–
–
100
ns
–
–
100
ns
1. The duty cycle characteristic is checked the sample chips of each production lot.
2. Oscillator stop function is built-in. When INHN goes LOW, normal output stops. When INHN goes HIGH, normal output is not resumed until after the
oscillator start-up time has elapsed.
SEIKO NPC CORPORATION —17