UPD78P324 Datasheet, PDF (74/80 Pages) NEC – 16-/8-Bit Single-Chip Microcomputers

µPD78P324, 78P324(A)
PROM Write Tools
Hardware
Software
PG-1500
UNISITE
2900
3900^Note
PA-78P324GJ
PA-78P324LP
PA-78P324KC
PA-78P324KD
PG-1500 controller
This PROM programmer is capable of programming by manipulating a PROM-
incorporated single-chip microcomputer from a stand-alone or host machine after
connecting the accompanying board and the separately available programmer
adapter.
It can also program representative PROMs ranging from 256 Kbits to 4 Mbits.
These are PROM programmers made by Data I/O Japan.
These are the PROM programmer adapters for writing programs into the
µPD78P324 on general-purpose PROM programmer such as PG-1500.
PA-78P324GJ: for µPD78P324GJ
PA-78P324LP: for µPD78P324LP
PA-78P324KC: for µPD78P324KC
PA-78P324KD: for µPD78P324KD
A PG-1500 and a host machine are connected with the serial interface or the parallel
interface to control the PG-1500 on the host machine.
Host machine
OS
PC-9800 series
MS-DOS
IBM PC/AT and its
compatible
machine
PC DOS
Supply medium
3.5-inch 2HD
5-inch 2HD
3.5-inch 2HC
5-inch 2HC
Part number
µS5A13PG1500
µS5A10PG1500
µS7B13PG1500
µS7B10PG1500
Note Being evaluated.
Remark The PG-1500 controller operation is assured only on the host machine and the OS above.
74