UPD78F9177 Datasheet, PDF (49/56 Pages) NEC – 8-BIT SINGLE-CHIP MICROCONTROLLER

µPD78F9177, 78F9177Y
APPENDIX B. DEVELOPMENT TOOLS
The following development tools are available for developing systems using the µPD78F9177 and µPD78F9177Y.
Language Processing Software
Notes 1, 2, 3
RA78K0S
Notes 1, 2, 3
CC78K0S
Notes 1, 2, 3
DF789177
Notes 1, 2, 3
CC78K0S-L
Assembler package common to 78K/0S Series
C compiler package common to 78K/0S Series
Device file for µPD789167, 789177, 789167Y, and 789177Y Subseries
C compiler library source file common to 78K/0S Series
Flash Memory Writing Tools
Flashpro lIl
Note 4
(Part No. FL-PR3 , PG-FP3)
Note 4
FA-44GB-8ES
FA-48GA
Flash programmer dedicated for on-chip flash memory microcontrollers
Flash memory programming adapter for 44-pin plastic LQFP (GB-8ES type)
Flash memory programming adapter for 48-pin plastic TQFP (fine pitch) (GA-9EU
type)
Debugging Tools(1/2)
IE-78K0S-NS
In-circuit emulator
IE-70000-MC-PS-B
AC adapter
IE-70000-98-IF-C
Interface adapter
IE-70000-CD-IF-A
PC card/interface
IE-70000-PC-IF-C
Interface adapter
IE-70000-PCI-IF
Interface adapter
IE-789177-NS-EM1
Emulation board
Note 4
NP-44GB
Emulation probe
Note 4
NP-44GB-TQ
EV-9200G-44
conversion socket
Emulation probe
Note 5
TGB-044SAP
conversion socket
In-circuit emulator used to debug hardware or software when application systems
which use the 78K/0S Series are developed. The IE-78K0S-NS supports an integrated
debugger (ID78K0S-NS). The IE-78K0S-NS is used in combination with an interface
adapter for connection to an AC adapter, emulation probe, or host machine.
Adapter used to supply power from a 100- to 240-V AC outlet
Adapter required when using the PC-9800 series (excluding notebook PCs) as the host
machine for the IE-78K0S-NS (C bus supported)
PC card and interface cable required when using a notebook PC as the host machine
for the IE-78K0S-NS (PCMCIA socket supported)
TM
Adapter required when using an IBM PC/AT or compatible as the host machine for
the IE-78K0S-NS (ISA bus supported)
Adapter required when using a PC equipped with a PCI bus as the host machine for
the IE-78K0S-NS
Emulation board used to emulate the peripheral hardware specific to the device. This
is used in combination with the in-circuit emulator.
Board to connect an in-circuit emulator to the target system. This is used in
combination with the EV-9200G-44
Conversion socket to connect the target system board on which a 44-pin plastic LQFP
can be mounted and the NP-44GB
Board to connect an in-circuit emulator to the target system. This is used in
combination with the TGB-044SAP.
Conversion socket to connect the target system board on which a 44-pin plastic LQFP
can be mounted and the NP-44GB-TQ
Data Sheet U14022EJ1V0DS00
49