UPD78F9177 Datasheet, PDF (31/56 Pages) NEC – 8-BIT SINGLE-CHIP MICROCONTROLLER

µPD78F9177, 78F9177Y
DC Characteristics (TA = −40 to +85 °C, VDD = 1.8 to 5.5 V)
Parameter
Symbol
Conditions
MIN.
TYP.
MAX.
Unit
Power supply
current
Note 1
IDD1
5.0-MHz crystal oscillation
operating mode
(C1 = C2 = 22pF)
Note 4
VDD = 5.0 V ± 10%
Note 5
VDD = 3.0 V ± 10%
Note 5
VDD = 2.0 V ± 10%
5.0
15.0
mA
2.0
5.0
mA
1.5
3.0
mA
Note 1
IDD2
5.0-MHz crystal oscillation
HALT mode
(C1 = C2 = 22pF)
Note 4
VDD = 5.0 V ± 10%
Note 5
VDD = 3.0 V ± 10%
Note 5
VDD = 2.0 V ± 10%
2.0
6.0
mA
1.0
2.5
mA
0.75
1.5
mA
Note 1
IDD3
32.768-kHz crystal
oscillation operating
Note 3
mode
(C3 = C4 = 22pF,
R = 220kΩ)
VDD = 5.0 V ± 10%
VDD = 3.0 V ± 10%
VDD = 2.0 V ± 10%
Note 1
IDD4
32.768-kHz crystal
Note 3
oscillation HALT mode
(C3 = C4 = 22pF,
R = 220kΩ)
VDD = 5.0 V ± 10%
VDD = 3.0 V ± 10%
VDD = 2.0 V ± 10%
Note 1
IDD5
32.768-kHz crystal stop
STOP mode
VDD = 5.0 V ± 10%
VDD = 3.0 V ± 10%
250
750
µA
200
600
µA
150
450
µA
50
150
µA
30
90
µA
20
60
µA
0.1
30
µA
0.05
10
µA
Note 2
IDD6
5.0-MHz crystal oscillation
A/D operating mode
(C1 = C2 = 22pF)
VDD = 2.0 V ± 10%
Note 4
VDD = 5.0 V ± 10%
Note 5
VDD = 3.0 V ± 10%
Note 5
VDD = 2.0 V ± 10%
0.05
10
µA
6.0
17.0
mA
3.0
7.0
mA
2.5
5.0
mA
Notes 1. The AVREFON (ADCS0 (bit 7 of ADM0; A/D converter mode register 0) = 1), AVDD, and the port current
(including the current flowing through the internal pull-up resistors) are not included.
2. The AVREFOn (ADCS0 =1) and port current (including the current flowing through the internal pull-up
resistors) are not included. Refer to the A/D converter characteristics for the current flowing through
AVREF.
3. When the main system clock is stopped.
4. During high-speed mode operation (when the processor clock control register (PCC) is set to 00H.)
5. During low-speed mode operation (when PCC is set to 02H)
Remark Unless otherwise specified, the characteristics of alternate-function pins are the same as those of port
pins.
Data Sheet U14022EJ1V0DS00
31