UPD784031 Datasheet, PDF (16/90 Pages) NEC – 16/8-BIT SINGLE-CHIP MICROCONTROLLER

µPD784031
Table 6-1. Types of I/O Circuits for Pins and Handling of Unused Pins (2/2)
Pin
RESET
TEST
AVREF1-AVREF3
AVSS
AVDD
I/O circuit type
2
1-A
-
I/O
Input
Recommended connection method for unused pins
-
To be connected to VSS0 directly
To be connected to VSS0
To be connected to VDD0
Caution When the I/O mode of an I/O dual-function pin is unpredictable, connect the pin to VDD0 through
a resistor of 10 to 100 kilohms (particularly when the voltage of the reset input pin becomes higher
than that of the low level input at power-on or when I/O is switched by software).
Remark Since type numbers are consistent in the 78K series, those numbers are not always serial in each product.
(Some circuits are not included.)
16