455600161 Datasheet, PDF (24/27 Pages) Molex Electronics Ltd. – 0.8MM HANDYLINK 16 CKT CRADLE CONN. ASSY PERPENDICULAR TO PCB

HANDYLINK™
APPLICATION SPECIFICATION
o Shelf Style
To achieve a ‘rocking’ disconnection for the end product from the cradle, a shelf style cradle design may be used under the
following conditions:
No supplemental guide posts may be used;
The end product may not have more than 1000 grams mass;
Side-to-side motion must be limited using end-walls or a guide rail;
The vibration conditions of the end application must be limited.
Connect
Direction
Disconnect
‘Rocking’
Direction
Shelf
(Bearing Surface)
24_REVISION:
ECR/ECN INFORMATION:
B
EC No: UCP2009-1982
DATE: 2009/02/09
DOCUMENT NUMBER:
SD-45560-002
Figure 19. Shelf-Style Cradle Features
NOTE: For details about mounting the connectors to the PCB and the use of
fasteners, please refer to the applicable Sales Drawings.
TITLE:
APPLICATION SPECIFICATION
HANDYLINK™I/O CONNECTOR SYSTEM
SHEET No.
24 of 27
CREATED / REVISED BY:
M. Simmel/D. Morgan
CHECKED BY:
M. Ibarra
APPROVED BY:
S. Miller
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC