455600161 Datasheet, PDF (12/27 Pages) Molex Electronics Ltd. – 0.8MM HANDYLINK 16 CKT CRADLE CONN. ASSY PERPENDICULAR TO PCB

HANDYLINK™
APPLICATION SPECIFICATION
6.2 Ingress Protection
Ingress protection, as described by IEC 60529, is a function of the customer’s enclosure. The HandyLink™ Receptacle Connector has
been designed to facilitate enclosure design when ingress protection is required. The interfaces between the metal and plastic
components of the connector are sealed to discourage intrusion of dust and liquid through the connector into the enclosure. The
customer is expected to design an appropriate seal around the periphery of the connector to adequately seal the finished enclosure.
Contact Molex for additional information.
Gaskets may be applied to the top and sides, or
front surfaces.
The bottom surface, once soldered, forms a continuous seal with the PCB
Figure 4. Sealing to achieve ingress protection with the receptacle connector
12_REVISION:
B
ECR/ECN INFORMATION:
EC No: UCP2009-1982
DATE: 2009/02/09
TITLE:
APPLICATION SPECIFICATION
HANDYLINK™I/O CONNECTOR SYSTEM
SHEET No.
12 of 27
DOCUMENT NUMBER:
SD-45560-002
CREATED / REVISED BY:
M. Simmel/D. Morgan
CHECKED BY:
M. Ibarra
APPROVED BY:
S. Miller
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC