455600161 Datasheet, PDF (20/27 Pages) Molex Electronics Ltd. – 0.8MM HANDYLINK 16 CKT CRADLE CONN. ASSY PERPENDICULAR TO PCB

HANDYLINK™
APPLICATION SPECIFICATION
o Supplemental Latching and Alignment Posts
Where the mass of the end product is greater than 1000 grams and is subject to sudden accelerations or strong vibrations during
use, a cup-style receptacle needs to be considered to adequately protect the connection interface. The cup-style receptacle should
incorporate separate external latching features and supplemental alignment posts similar to those illustrated below. NOTE: The cup-
style receptacle’s dimensions must restrict angular misalignment, when mated, to within the limits specified in Section 4.2.
Supplemental alignment posts
External latching feature (each side)
Cup-style receptacle (separate
molded part)
Guide ribs (each side)
Figure 14. Use of a cup-style receptacle for added support and alignment
20_REVISION:
ECR/ECN INFORMATION:
B
EC No: UCP2009-1982
DATE: 2009/02/09
DOCUMENT NUMBER:
SD-45560-002
TITLE:
APPLICATION SPECIFICATION
HANDYLINK™I/O CONNECTOR SYSTEM
SHEET No.
20 of 27
CREATED / REVISED BY:
M. Simmel/D. Morgan
CHECKED BY:
M. Ibarra
APPROVED BY:
S. Miller
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC