M34512M2 Datasheet, PDF (77/80 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER

PRELIMINARY _{NSocothimcaene:gpTeah.riasmisetnrioct} ^{laimfiintsalasrepescuibfijceacttioton.}
MITSUBISHI MICROCOMPUTERS
4512 Group
SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
32P6B (32-PIN LQFP) MARK SPECIFICATION FORM
Mitsubishi IC catalog name
Please choose one of the marking types below (A, B), and enter the Mitsubishi catalog name and the special mark (if needed).
A. Standard Mitsubishi Mark
24
25
17
16
Mitsubishi lot number
(4-digit or 5-digit)
Mitsubishi IC catalog name
Mitsubishi IC catalog name
Note: If the Mitsubishi logo is not required, check the box on the right.
Mitsubishi logo is not required
32
1
9
8
B. Customer’s Parts Number + Mitsubishi catalog name
24
25
17
16
32
1
9
8
Customer’s Parts Number
Note : The fonts and size of characters are standard Mitsubishi
type.
Mitsubishi IC catalog name
Note1 : The mark field should be written right aligned.
2 : The fonts and size of characters are standard Mitsubishi
type.
(The Mitsubishi logo is not marked.)
3 : Customer’s Parts Number can be up to 7 characters :
. ^, Only 0 ~ 9, A ~ Z, —(hyphen), (periods), (commas) are
usable.
C. Customer’s Parts Number
24
25
32
1
17
16
9
8
Customer’s Parts Number
Note : The fonts and size of characters are standard Mitsubishi type.
Shaded area: Mitsubishi lot number (4-digit or 5-digit) and Mask ROM
number (3-digit) are always marked, for products classi-
fication.
Note1 : The mark field should be written right aligned.
2 : The fonts and size of characters are standard Mitsubishi type.
3 : Customer’s Parts Number can be up to 11 characters : Only 0
. ^, ~ 9, A ~ Z, —(hyphen), (periods), (commas) are usable.
77