M34512M2 Datasheet, PDF (75/80 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER

PRELIMINARY _{NSocothimcaene:gpTeah.riasmisetnrioct} ^{laimfiintsalasrepescuibfijceacttioton.}
MITSUBISHI MICROCOMPUTERS
4512 Group
SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
GZZ-SH52-47B <81A0>
4500 SERIES MASK ROM ORDER CONFIRMATION FORM
SINGLE-CHIP MICROCOMPUTER M34512M2-XXXFP
MITSUBISHI ELECTRIC
Please fill in all items marked V.
Mask ROM number
Date:
Section head Supervisor
signature
signature
Company
name
V Customer
Date
issued
Date:
TEL (
Responsible
officer
Supervisor
)
V 1. Confirmation
Specify the type of EPROMs submitted.
Three sets of EPROMs are required for each pattern (check in the approximate box).
If at least two of the three sets of EPROMs submitted contain the identical data, we will produce
masks based on this data. We shall assume the responsibility for errors only if the mask ROM data
on the products we produce differ from this data. Thus, the customer must be especially careful in
verifying the data contained in the EPROMs submitted.
Checksum code for entire EPROM area
(hexadecimal notation)
EPROM Type:
27C256
27C512
000016
Low-order
2.00K
5-bit data _07FF16
000016
Low-order
2.00K
5-bit data _07FF16
400016 2.00K
High-order
5-bit data _47FF16
7FFF16
400016
High-order
2.00K
5-bit data _47FF16
FFFF16
Set “FF16” in the shaded area.
Set “1112” in the area
of low-order and high-order 5-bit data.
V 2. Mark Specification
Mark specification must be submitted using the correct form for the type of package being ordered.
Fill out the approximate Mark Specification Form (32P6B-A for M34512M2-XXXFP) and attach to
the Mask ROM Order Confirmation Form.
V 3. Comments
75