M38503MXH Datasheet, PDF (74/86 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER

MITSUBISHI MICROCOMPUTERS
3850 Group (Spec. H)
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
ELECTRICAL CHARACTERISTICS
Table 28 Absolute maximum ratings
Symbol
VCC
VI
VI
VI
VI
VO
VO
Pd
Topr
Tstg
Parameter
Power source voltage
Input voltage P00–P07, P10–P17, P20, P21,
P24–P27, P30–P34, P40–P44,
VREF
Input voltage P22, P23
Input voltage RESET, XIN
Input voltage CNVSS
Output voltage P00–P07, P10–P17, P20, P21,
P24–P27, P30–P34, P40–P44,
XOUT
Output voltage P22, P23
Power dissipation
Operating temperature
Storage temperature
Note : The rating becomes 300mW at the 42P2R-A/E package.
Conditions
All voltages are based on VSS.
Output transistors are cut off.
Ta = 25 °C
Ratings
Unit
–0.3 to 6.5
V
–0.3 to VCC +0.3
V
–0.3 to 5.8
V
–0.3 to VCC +0.3
V
–0.3 to VCC +0.3
V
–0.3 to VCC +0.3
V
–0.3 to 5.8
V
1000 (Note)
mW
–20 to 85
°C
–40 to 125
°C
Table 29 Recommended operating conditions (1)
(VCC = 2.7 to 5.5 V, Ta = –20 to 85 °C, unless otherwise noted)
Symbol
VCC
VSS
VREF
AVSS
VIA
VIH
VIH
VIL
VIL
VIL
ΣIOH(peak)
ΣIOH(peak)
ΣIOL(peak)
ΣIOL(peak)
ΣIOL(peak)
ΣIOH(avg)
ΣIOH(avg)
ΣIOL(avg)
ΣIOL(avg)
ΣIOL(avg)
Parameter
Power source voltage
Power source voltage
8 MHz (high-speed mode)
8 MHz (middle-speed mode), 4 MHz (high-speed mode)
A-D convert reference voltage
Analog power source voltage
Analog input voltage
“H” input voltage
AN0–AN4
P00–P07, P10–P17, P20–P27, P30–P34, P40–P44
“H” input voltage
RESET, XIN, CNVSS
“L” input voltage
P00–P07, P10–P17, P20–P27, P30–P34, P40–P44
“L” input voltage
RESET, CNVSS
“L” input voltage
XIN
“H” total peak output current
P00–P07, P10–P17, P30–P34 (Note)
“H” total peak output current
P20, P21, P24–P27, P40–P44 (Note)
“L” total peak output current (Note) P00–P07, P30–P34
“L” total peak output current (Note) P10–P17
“L” total peak output current
P20–P27,P40–P44 (Note)
“H” total average output current P00–P07, P10–P17, P30–P34 (Note)
“H” total average output current P20, P21, P24–P27, P40–P44 (Note)
“L” total average output current (Note) P00–P07, P30–P34
“L” total average output current (Note) P10–P17
“L” total average output current P20–P27,P40–P44 (Note)
Min.
4.0
2.7
2.0
AVSS
0.8VCC
0.8VCC
0
0
0
Limits
Unit
Typ. Max.
5.0
5.5
V
5.0
5.5
0
V
VCC
V
0
V
VCC
V
VCC
V
VCC
V
0.2VCC V
0.2VCC V
0.16VCC V
–80 mA
–80 mA
80 mA
120 mA
80 mA
–40 mA
–40 mA
40 mA
60 mA
40 mA
Note : The total output current is the sum of all the currents flowing through all the applicable ports. The total average current is an average value measured
over 100 ms. The total peak current is the peak value of all the currents.
74