RFPIC12C509AG Datasheet, PDF (77/104 Pages) Microchip Technology – 18/20-Pin 8-Bit CMOS Microcontroller with UHF ASK/FSK Transmitter

rfPIC12C509AG/509AF
11.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings†
Ambient Temperature under bias .............................................................................................................. -40°C to +85°C
Storage Temperature .............................................................................................................................. -40°C to +150°C
Absolute Maximum Ratings - PICmicro
Voltage on VDD with respect to VSS .................................................................................................................0 to +7.0 V
Absolute Maximum Ratings - Transmitter
Voltage on VDDRF with respect to VSSRF .....................................................................................................-0.3 to +7.0 V
Voltage on MCLR with respect to VSS...............................................................................................................0 to +14 V
Voltage on all other PICmicro pins with respect to VSS................................................................. -0.3 V to (VDD + 0.3 V)
Voltage on all other Transmitter pins with respect to VSSRF ..........................................................-0.3 to (VDDRF +0.3 V)
Max. Current into RFEN pin.........................................................................................................................-1.0 to 1.0 mA
Total Power Dissipation⁽¹⁾ .................................................................................................................................... 700 mW
Max. Current out of VSS pin .................................................................................................................................. 200 mA
Max. Current into VDD pin ..................................................................................................................................... 150 mA
Input Clamp Current, IIK (VI < 0 or VI > VDD) ........................................................................................................ ±20 mA
Output Clamp Current, IOK (VO < 0 or VO > VDD).................................................................................................. ±20 mA
Max. Output Current sunk by any I/O pin................................................................................................................25 mA
Max. Output Current sourced by any I/O pin...........................................................................................................25 mA
Max. Output Current sourced by I/O port (GPIO)..................................................................................................100 mA
Max. Output Current sunk by I/O port (GPIO )......................................................................................................100 mA
Note 1: Power Dissipation is calculated as follows: PDIS = VDD x {IDD - ∑ IOH} + ∑ {(VDD-VOH) x IOH} + ∑(VOL x IOL)
†_{NOTICE: Stresses above those listed under "Maximum Ratings" may cause permanent damage to the device. This}
is a stress rating only and functional operation of the device at those or any other conditions above those indicated
in the operation listings of this specification is not implied. Exposure to maximum rating conditions for extended
periods may affect device reliability.
© 2001 Microchip Technology Inc.
Preliminary
DS70031A-page 75