RFPIC12F675K Datasheet, PDF (74/136 Pages) Microchip Technology – 20-Pin FLASH-Based 8-Bit CMOS Microcontroller with UHF ASK/FSK Transmitter

rfPIC12F675
signals are routed to the MPLAB ICD 2 connector. On
the bottom of the header is an 8-pin socket that plugs
into the user’s target via the 8-pin standoff connector.
When the ICD pin on the PIC12F675-ICD device is held
low, the In-Circuit Debugger functionality is enabled.
This function allows simple debugging functions when
used with MPLAB ICD 2. When the microcontroller has
this feature enabled, some of the resources are not
available for general use. Table 10-10 shows resources
consumed by the background debugger:
TABLE 10-10: DEBUGGER RESOURCES
I/O pins
Stack
Program Memory
ICDCLK, ICDDATA
1 level
Address 0h must be NOP
300h - 3FEh
For more information, see 8-Pin MPLAB ICD 2 Header
Information Sheet (DS51292) available on Microchip’s
website (www.microchip.com).
FIGURE 10-16: IN-CIRCUIT DEBUGGING USING THE PARALLEL DIP SOCKET
DVA12XP081
or
AC162050
To MPLAB ICE 2000
PCM12XB0
Standoff
rfPIC12F675
Socket
FIGURE 10-17:
IN-CIRCUIT PROGRAMMING USING THE PARALLEL DIP SOCKET
rfPIC12F675
Socket
Standoff
Programmer
DS70091A-page 72
Preliminary
 2003 Microchip Technology Inc.