PIC18F14K22LIN Datasheet, PDF (41/62 Pages) Microchip Technology – 20-Pin Flash Microcontrollers 20-Pin Flash Microcontrollers

PIC18F14K22LIN
8.2 DC Characteristics: RC Idle Supply Current, PIC18F14K22LIN
PIC18F14K22LIN
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +125°C for extended
D011
8.5 12.5 A
9.5 14.5 A
13.5 24.5 A
24.5 30.5 A
-40°C
+25°C
+85°C
+125°C
VDD = 5.0V
FOSC = 31 kHz⁽⁴⁾
(RC_IDLE mode,
LFINTOSC source)
D012
630 780 A -40°C to +125°C
VDD = 5.0V
FOSC = 1 MHz
(RC_IDLE mode,
HF-INTOSC source)
D013
1.8 2.2 mA -40°C to +125°C
VDD = 5.0V
FOSC = 16 MHz
(RC_IDLE mode,
HF-INTOSC source)
* These parameters are characterized but not tested.
Note 1: The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
3: For RC oscillator configurations, current through REXT is not included. The current through the resistor can be extended
by the formula IR = VDD/2REXT (mA) with REXT in k
4: FVR and BOR are disabled.
5: When a single temperature range is provided for a parameter, the specification applies to both industrial and extended
temperature devices.
 2011 Microchip Technology Inc.
Preliminary
DS41580A-page 45