PIC18F14K22LIN Datasheet, PDF (40/62 Pages) Microchip Technology – 20-Pin Flash Microcontrollers 20-Pin Flash Microcontrollers

PIC18F14K22LIN
FIGURE 8-1:
125
85
HFINTOSC FREQUENCY ACCURACY OVER DEVICE VDD AND TEMPERATURE
± 6%
60
± 3%
25
0
-20
-40
1.8 2.0
2.5
± 6%
3.0
3.5
4.0
4.5
5.0
5.5
VDD (V)
8.1 DC Characteristics: RC Run Supply Current, PIC18F14K22LIN
PIC18F14K22LIN
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +125°C for extended
Param
No.
Device Characteristics
Typ. Max. Units
Conditions
D008
D009
15.5 19.5 A
16.5 20.5 A
20.5 29.5 A
30.5 35.5 A
-40°C
+25°C
+85°C
+125°C
0.98 0.98 mA -40°C TO +125°C
VDD = 5.0V
FOSC = 31 kHz⁽⁴⁾
(RC_RUN mode,
LFINTOSC source)
VDD = 5.0V
FOSC = 1 MHz
(RC_RUN mode,
HFINTOSC source)
D010
FOSC = 16 MHz
4.0
4.7
mA -40°C TO +125°C
VDD = 5.0V
(RC_RUN mode,
HF-INTOSC source)
* These parameters are characterized but not tested.
Note 1: The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
3: For RC oscillator configurations, current through REXT is not included. The current through the resistor can be extended
by the formula IR = VDD/2REXT (mA) with REXT in k
4: FVR and BOR are disabled.
5: When a single temperature range is provided for a parameter, the specification applies to both industrial and extended
temperature devices.
DS41580A-page 44
Preliminary
 2011 Microchip Technology Inc.