PIC16LF1503 Datasheet, PDF (292/340 Pages) Microchip Technology – 14-Pin Flash, 8-Bit Microcontrollers

PIC16(L)F1503
DC Characteristics: PIC16(L)F1503-I/E (Power-Down) (Continued)
PIC16LF1503
PIC16F1503
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param
No.
Device Characteristics
Min.
Typ†
Max.
+85°C
Max.
+125°C
Units
VDD
Conditions
Note
Power-down Base Current (IPD) in Low-Power Sleep mode⁽²⁾
—
0.1
1.5
2.0
A
2.3 Base
0.2
1.7
2.3
A
3.0
0.3
1.9
2.5
A
5.0
—
18
40
45
A
2.3 FVR Enabled
18.5 45
50
A
3.0
19
47
52
A
5.0
—
8.0
20
25
A
3.0 BOR Enabled
9.5
24
30
A
5.0
—
3.2
13
3.5
14
18
A
2.3 Comparator Enabled
19
A
3.0 ^{(LP mode)}
3.6
15
20
A
5.0
— 17.0 40
17.5 42
45
A
2.3 Comparator Enabled
47
A
3.0 ^{(HP mode)}
18.0 43
48
A
5.0
*
†
Legend:
Note 1:
2:
3:
These parameters are characterized but not tested.
Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
TBD = To Be Determined
The peripheral current is the sum of the base IDD or IPD and the additional current consumed when this peripheral is
enabled. The peripheral  current can be determined by subtracting the base IDD or IPD current from this limit. Max
values should be used when calculating total current consumption.
The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with
the part in Sleep mode, with all I/O pins in high-impedance state and tied to VDD.
A/D oscillator source is FRC.
DS41607A-page 292
Preliminary
 2011 Microchip Technology Inc.