PIC16LF1503 Datasheet, PDF (289/340 Pages) Microchip Technology – 14-Pin Flash, 8-Bit Microcontrollers

PIC16(L)F1503
28.2 DC Characteristics: PIC16(L)F1503-I/E (Industrial, Extended) (Continued)
PIC16LF1503
PIC16F1503
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param
No.
Device
Characteristics
Min. Typ† Max. Units
VDD
Conditions
Note
D019B
—
34
210
A
3.0 FOSC = 500 kHz
—
37
270
A
5.0 ^{ECM mode}
D019C
—
0.65
—
mA
3.0 FOSC = 20 MHz
ECH mode
D019C
—
0.75
—
mA
3.0 FOSC = 20 MHz
—
0.87
—
mA
5.0 ^{ECH mode}
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
Note 1: The test conditions for all IDD measurements in active operation mode are: CLKIN = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
 2011 Microchip Technology Inc.
Preliminary
DS41607A-page 289