PIC16F720_13 Datasheet, PDF (202/254 Pages) Microchip Technology – 20-Pin Flash Microcontrollers

PIC16(L)F720/721
TABLE 23-6: CAPTURE/COMPARE/PWM REQUIREMENTS (CCP)
Standard Operating Conditions (unless otherwise stated)
Operating Temperature -40°C  TA  +125°C
Param.
No.
Sym.
Characteristic
Min.
Typ† Max. Units
Conditions
CC01* TccL CCP Input Low Time
No Prescaler 0.5TCY + 20 — — ns
With Prescaler
20
— — ns
CC02* TccH CCP Input High Time
No Prescaler 0.5TCY + 20 — — ns
With Prescaler
20
— — ns
CC03* TccP CCP Input Period
3TCY + 40 — — ns N = prescale value (1, 4 or 16)
N
* These parameters are characterized but not tested.
† Data in “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
TABLE 23-7: PIC16F720/721 A/D CONVERTER (ADC) CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +125°C
Param.
No.
Sym.
Characteristic
Min. Typ† Max. Units
Conditions
AD01
AD02
AD03
AD04
AD07
AD07
AD08*
*
†
NR Resolution
—
—
8
bit
EIL Integral Error
—
—
±1.0 LSb VDD = 3.0V
EDL Differential Error
—
—
±1 LSb No missing codes
VDD = 3.0V
EOFF Offset Error
—
—
±2.0 LSb VDD = 3.0V
EGN Gain Error
—
—
±1.5 LSb VDD = 3.0V
VAIN Full-Scale Range
VSS
—
VDD
V
ZAIN Recommended Impedance of
Analog Voltage Source
—
—
10 k Can go higher if external 0.01F capacitor is
present on input pin.
These parameters are characterized but not tested.
Data in “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
DS41430D-page 202
 2010-2013 Microchip Technology Inc.