MLX80004 Datasheet, PDF (7/38 Pages) Melexis Microelectronic Systems – Enhanced Universal Dual/Quad LIN Transceiver

MLX80002/MLX80004
Enhanced Universal Dual/Quad LIN Transceiver
Datasheet
7. Electrical Specification
All voltages are referenced to ground (GND). Positive currents flow into the IC.
The absolute maximum ratings (in accordance with IEC 60 134) given in the table below are limiting values that do not
lead to a permanent damage of the device but exceeding any of these limits may do so. Long term exposure to limiting
values may affect the reliability of the device.
7.1. Operating Conditions
Nr. Parameter
101
Battery supply voltage ^{[1] [2]}
102 Extended battery supply voltage
103 Operating ambient temperature
104
Voltage on low voltage I/Os (RxDx, TxDx,
MODEx
Table 2: Operating Conditions
Symbol
Min
VS
5
Vs_NON_OP
5
Tamb
-40
RxDx, TxDx,
MODEx
-0.3
Max
27
40
+125
5.5
Unit Remark
V
V
Parameter deviations
allowed
°C
V
[1] Vs is the IC supply voltage including voltage drop of reverse battery protection diode, VDROP = 0.4 to 1V,
[2] Operating voltage range of the LIN2.x/SAE J2602 plug & play specification is 7V…18V
Revision 021 – Sept 2016
Page 7 of 38