TH8062 Datasheet, PDF (1/38 Pages) Melexis Microelectronic Systems – Voltage Regulator with LIN Transceiver

TH8062
Voltage Regulator with LIN Transceiver
Features
o Compatible to LIN Specification 2.0 and SAE J2602
o Operating voltage V_S = 6 ... 18 V
o Low standby current consumption of typ. 15 μA in sleep mode
ƒ “noload” current < 200µA
o Linear low drop voltage regulator 5V/70mA ±2%
ƒ Output current limitation
o LIN-Bus Transceiver
ƒ Compatible to ISO9141 functions
ƒ Baud rate up to 20 kBaud
ƒ Slew rate control for best EME behavior
ƒ Low slew mode for optimized SAE J2602 transmission
ƒ High EMI immunity
ƒ High signal symmetry for using in RC – based slave nodes up to 2% clock tolerance
ƒ Current limitation
ƒ Bus input voltages -24V to 30V independent from VBat
o Wake-up via LIN bus traffic
o Reset output (default 8ms/4.65V)
ƒ Reset time adjustable to 4ms, 15ms and 30ms during IC final test
o Over temperature shutdown
o Automotive temperature range of –40°C to 125°C
o CMOS compatible interface to microcontroller
o Load dump protected (40V)
o Small SOIC8 package
o Pin compatible to the Melexis TH8061
Ordering Information
Part No.
TH8062 KDC AA
On Request
TH8062 KDC AB
TH8062 KDC AC
TH8062 KDC AD
Temperature Range
K (-40 to 125 °C)
K (-40 to 125 °C)
K (-40 to 125 °C)
K (-40 to 125 °C)
Package Version
DC (SOIC8) A
DC (SOIC8) A
DC (SOIC8) A
DC (SOIC8) A
POR-Time
A (8ms)
B (4ms)
C (30ms)
D (15ms)
General Description
The TH8062 consists of a low-drop voltage regulator 5V/70mA and a LIN bus transceiver. The LIN
transceiver is suitable for LIN bus systems conform to LIN specification revision 2.0 and SAE J2602.
The combination of voltage regulator and bus transceiver makes it possible to develop simple, but powerful
and cheap slave nodes in LIN Bus systems.
TH8062 – Datasheet
3901008062
Page 1 of 38
March 2006
Rev 002