English
Language : 

97SD3240 Datasheet, PDF (22/39 Pages) Maxwell Technologies – 1.25Gb SDRAM 8-Meg X 40-Bit X 4-Banks
1.25Gb (8-Meg X 40-Bit X 4-Banks) SDRAM
97SD3240
Auto Precharge
Read with auto-precharge: In this operation, since precharge is automatically performed after completing a
read operation, a precharge command need not be executed after each read operation. The command
executed for the same bank after the execution of this command must be the bank active (ACTV) command.
In addition, an interval defined by IARP is required before execution of the next command.
CAS latency
3
2
Precharge start cycle
2 cycles before the final data is output
1 cycle before the final data is output
Burst Read (Burst Length = 4)
02.04.05 Rev 3
All data sheets are subject to change without notice 22
©2005 Maxwell Technologies
All rights reserved.