MAX11101 Datasheet, PDF (14/19 Pages) Maxim Integrated Products – 14-Bit, +5V, 200ksps ADC with 10μA Shutdown

MAX11101
14-Bit, +5V, 200ksps ADC with 10µA Shutdown
I/O
SCK
MISO
SPI
VDD
SS
Figure 10a. SPI Connections
CS
SCLK
DOUT
MAX11101
SPI and MICROWIRE Interfaces
When using the SPI (Figure 10a) or MICROWIRE (Figure 10b)
interfaces, set CPOL = 0 and CPHA = 0. Conversion
begins with a falling edge on CS (Figure 10c). Three con-
secutive 8-bit readings are necessary to obtain the entire
14-bit result from the ADC. DOUT data transitions on
the serial clock’s falling edge. The first 8-bit data stream
contains all leading zeros. The second 8-bit data stream
contains the MSB through D6. The third 8-bit data stream
contains D5 through D0 followed by S1 and S0.
I/O
SK
SI
MICROWIRE
CS
SCLK
DOUT
MAX11101
Figure 10b. MICROWIRE Connections
SCLK
CS
1ST BYTE READ
1
4
6
8
2ND BYTE READ
12
16
DOUT*
0
0
0
0
0
*WHEN CS IS HIGH, DOUT = HIGH-Z
0
0
0
3RD BYTE READ
20
D13 D12 D11 D10 D9 D8 D7
MSB
D6 D5
24
D5 D4 D3 D2 D1 D0 S1 S0
LSB
HIGH-Z
Figure 10c. SPI/MICROWIRE Interface Timing Sequence (CPOL = CPHA =0)
���������������������������������������������������������������� Maxim Integrated Products  14