2042274-2 Datasheet, PDF (73/111 Pages) Tyco Electronics – Power Connectors & Interconnection Systems

Power Connectors & Interconnection Systems
High Current Products (LOUVERTAC Contacts) (Continued)
LOUVERTAC Strip,
Torsional Louver Type
The Torsional Louver Type Band was
designed as an electrical interface that
allows the transfer of high current and a
more generous tolerance between mat-
ing surfaces. A strip can be sized with
scissors in an on-site installation. They
are available for use in flat and circular
applications. A male band is used on
the outside diameter of a pin. The female
band is used on the inside diameter of
a socket.
LAO
.092 [2.27] Louver Height
Tooth Angle — 15°
Minimum Diameter — 1.75 inches
Material — Beryllium Copper
Finish — See Tables
.200
[5.08]
Pitch
1.02
[25.9]
Part Number Application
192000-2 Flat or Female
192000-9 Flat or Female
192001-4 Flat or Male
Material
Thickness
.006
.15
.010
.25
.006
.15
Suggested Current
Limit per inch
150
250
150
Finish
Silver
Silver
Silver
LAOG
Louver Height — See Table
Tooth Angle — 45°
Minimum Diameter — 1.75 inches
.100
[2.54]
Pitch
Louver Ht.
.980
[24.90]
Part Number
192002-1
192002-2
192002-3
Application
Flat or Female
Flat or Female
Flat or Female
Material
Thickness
.006
.15
.006
.15
.010
.25
Suggested Current
Limit per inch
300
300
500
Louver
Height
.105
2.67
.105
2.67
.110
2.79
Finish
Unplated
Silver
Unplated
LAIA
.050 [1.27] Louver Height
.100
[2.54]
Tooth Angle — See Table
Pitch
.69
[17.5]
Minimum Diameter — 1¹â„2 inches
134
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Part Number
192004-4
192004-6
192004-8
1-192004-1
1-192004-4
192007-7
192008-1
Application
Flat or Female
Flat or Female
Flat or Female
Flat or Female
Flat or Female
Flat or Male
Flat or Male
Material
Thickness
.004
.10
.004
.10
.006
.15
.006
.15
.006
.15
.006
.15
.004
.10
Suggested Current
Limit per inch
150
150
250
250
250
250
150
Notes: 1. Product will be sold by the foot except where length is specified.
2. Suggested current limits are application dependent.
3. Additional sizes are available upon request.
Note: All part numbers are RoHS compliant.
Tooth
Angle
15°
45°
15°
15°
45°
15°
45°
Finish
Silver
Silver
Silver
Gold
Silver
Silver
Silver
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666