2042274-2 Datasheet, PDF (2/111 Pages) Tyco Electronics – Power Connectors & Interconnection Systems

3 mm Diameter Test Probe in
Accordance with IEC 435
Protective Cap (insulator)
Power Connectors & Interconnection Systems
ELCON Drawer Series Connectors
True Hot-Plug, Blind-Mating Mixed Signal and Power Connectors (Continued)
Probe-proof Double
CROWN BAND Contacts
The size #0 contacts used
in the Top Drawer, Double
Drawer, DualPower and
QuadPower connectors
are also available in a
probe-proof double
CROWN BAND version.
These contacts are spe-
cially suited for operator-
serviced power supplies
that require extra safety
protection.
Signal/Power Sequencing
All signal and some power
contacts are available in
various lengths to allow
multiple levels of sequenc-
ing, thus giving the engineer
further design flexibility.
Mating Polarization
To provide for positive
housing mating of
connectors, polarization
is provided in the form of
molded-in guide posts or
pre-installed guide pins.
Regulatory Agency
Certifications
Tyco Electronics ELCON
drawer series connectors
have been evaluated and
found to comply with the
UL1977 standard and the
CSA standard C22.2 No.
182.3-M1987.
Tyco Electronics can also
work with the customer to
obtain application-specific
regulatory certifications if
needed.
®
C
US
Wide Array of
Standard Contacts
Contact Size
#20
#16
#12
#8
#4
#0
ELCON drawer connectors
support various termination
styles, including crimp for
cable, solder tail and com-
pliant press-fit for mounting
PC Tail
•
•
•
•
Press-fit
•
•
•
•
to PCB, and internal/
external threads for termina-
tion to lugs and/or busbars.
See table below for details.
Termination
Crimp
•
•
•
•
•
•
Threaded
Internal
External
•
•
•
•
•
•
Application-Specific Designs
If none of our standard
drawer connectors
satisfies your requirements,
Tyco Electronics can
develop an ELCON con-
nector design specific to
your application. We will
work closely with your engi-
neers to fully understand
the design requirements
and develop an intercon-
nect solution that meets
your stated needs. After the
concept and design stages,
Tyco Electronics produces
prototypes that perform
both electrically and
mechanically the same as
production parts. These
machined parts are used
for testing, regulatory
agency evaluations and
even as pre-production
components, allowing the
shortest lead time from
concept to manufacturing
in the industry.
Concept
Tyco Electronics engineers
work closely with the cus-
tomer to fully understand
the design requirements.
Design
A sketch drawing of the
design concept is created
for customer review, and the
design is finalized only when
it fully meets the require-
ments of the customer.
Prototypes
The design is frozen and
work on the mold tools starts.
Meanwhile, Tyco Electronics
builds prototypes that are
identical to the production
parts.
Production
By the time the customer
is ready for production, all
requirements for release
to production, such as
qualification and regulatory
agency approval, have
been cleared.
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
63
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666