2042274-2 Datasheet, PDF (24/111 Pages) Tyco Electronics – Power Connectors & Interconnection Systems

Power Connectors & Interconnection Systems
Hybrid Blind-Mate Drawer Connectors
Product Facts
■ High current circuits and
signal circuits can be mixed
in the same connector
■ High current circuits use
MIC connector contacts
located at four corners of
the housing
■ Signal circuits use Standard
Drawer Connector contacts
■ 24 positions
■ Hermaphroditic housing
can be mated with top and
bottom turned while
maintaining polarity
Hybrid Drawer Connectors
offer high current and
signal circuits mixed in the
same connector system.
High current circuits use
MIC connector contacts
which are located at the
four corners of the housing.
Signal circuits use the same
hermaphroditic crimp snap-
in contacts that are used
in the Standard Drawer
Connector.
The hermaphroditic hous-
ings are available in a pop-
ular 24-position size. These
housings can be mated
with top and bottom turned
while maintaining polarity.
Performance Specifications
Voltage Rating — 250 VAC
Current Rating (Max.) —
Signal Circuit (Drawer);
4 Amps — 24 AWG [0.2 mm²] Wire
5 Amps — 22 AWG [0.3-0.4 mm²] Wire
7 Amps — 20 AWG [0.5-0.6 mm²] Wire
Power Circuit (MIC);
10 Amps
Low Level Resistance —
Signal Circuit (Drawer);
10 milliohms max. (Initial)
20 milliohms max. (Final)
Power Circuit (MIC);
3 milliohms (Initial)
6 milliohms (Final)
Dielectric Withstanding Voltage —
5000 milliohms (Initial)
2000 milliohms (Final)
Operating Temperature —
–20°C to +120°C
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
85
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666