2042274-2 Datasheet, PDF (4/111 Pages) Tyco Electronics – Power Connectors & Interconnection Systems

Power Connectors & Interconnection Systems
ELCON Drawer Connector Mounting
All ELCON drawer series connectors can be fix-mounted or float-mounted using the designated shoulder screws to allow
improved gatherability for blind-mating of the connector. Panel cut out dimensions are shown on the customer drawing
specific to your ELCON drawer connector.
Panel Float Mounting
When float-mounting to a panel or chassis, use the stainless steel shoulder screws specified in the layout sheet or
customer drawing specific to your ELCON drawer connector. Shown in the sketch below is an example of how the
Top Drawer connector is float-mounted to a panel.
Float-Mount of Top Drawer (Example)
Mounting
Flange
Panel (Ref)
Shoulder
Screw
Guide Pin
Screw Description
#10-32 UNF 2A Thread
M5 x 0.8 Metric Thread
#8-32 UNF 2A Thread
#6-32 UNF 2A Thread
M4 x 0.7 Metric Thread
Part Number
1650399-1
1650401-1
1650402-1
1650106-1
1650589-1
Used On
Top and Double Drawer, Dual and QuadPower,
In-Line QuadPower, W5 Drawer
All Other Drawers
Panel Fix Mounting
As a rule of thumb, ELCON drawer connectors can be fix-mounted to a panel, in two ways: (1) by attaching a screw
through the top and bottom mounting flange of the housing; or (2) by attaching a screw into a threaded guide pin (for
those connectors that have one). An example of each case is shown in the sketches below.
Screw Through Mounting Flange of Housing
Fix to the panel by attaching a commercially available
screw and a washer through the top and bottom mounting
flange of the housing.
Screw Into Thread of Guide Pin (When Applicable)
You can optionally fix-mount housings that have a guide
pin by attaching a commercially available screw and
washer into the thread on the back of the guide pin, as
shown in the figures below.
Commercially
available screw
and washer
Commercially
available screw
and washer
Internally threaded
(6-32) guide pin
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Note: All part numbers are RoHS compliant.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
#6-32 or
M3 x 0.5 screw
Guide pin
.25
[6.35]
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
65
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666