2042274-2 Datasheet, PDF (44/111 Pages) Tyco Electronics – Power Connectors & Interconnection Systems

Power Connectors & Interconnection Systems
AMP-DUAC PL Connectors
Product Facts
■ Wire to board connection
system
■ Improved dual-action
contact design — provides
better contact lead-in and
reduces contact mating
force
■ Sequenced contacts
available for mate-first
break-last operation
■ 4-, 6- and 12-position
right-angle headers and
free hanging receptacles
■ 4.2 mm x 5.5 mm centerline
■ Receptacle contacts
designed for 26-16 AWG
stranded wire
■ Recognized under the
Component Program of
Underwriters
Laboratories Inc., R
File No. E28476
■ Certified by Canadian
R
Standards Association,
File No. LR7189
Technical Documents
Product Specification
108-1646
Application Specification
114-6067-Crimping Contacts
Qualification Test Report
501-394
Performance Data
Voltage Rating — 600 VAC
Current Rating — 9 Amps maximum
in 2-position application
Low Level Resistance —
10 megohms max.
Dielectric Withstanding Voltage —
1500 VAC/min.
Insulation Resistance —
1000 Megohms minimum
Operating Temperature —
-55°C to + 105°C [-67°F to +221°F]
The latest addition to the
4.2 mm Wire-to-Board
Power Connectors is the
AMP-DUAC PL Connector.
This product uses the
industry proven AMP-DUAC
contacts with the addition
of several housing improve-
ments to offer significant
overall improvements in
connector reliability. The
product is available in both
component form and as
fully assembled custom
cable assemblies.
The AMP-DUAC PL
housings are designed to
confirm that all electrical
contacts are fully seated.
The “PL” refers to “Positive
Locking” of the contacts.
It is also referred to as
terminal position assurance.
Contacts are inserted into
the receptacle housing and
the contact lock is installed
to lock all the contacts into
position. If any one of the
contacts is not fully inserted,
the contact lock cannot
be installed. This feature
eliminates a common
concern of operator fatigue
and the resulting contact
back-out, which occurs
when a contact is not
installed properly. An
improved mounting flange
has also been added for
more secure printed circuit
board mounting.
Finally, the housings
have been re-designed to
provide an improved latch,
which offers a metal spring
instead of the original
plastic spring/latch. An
extended latch arm is also
available for hard to reach
installations or where the
connectors are stacked in
close proximity.
All the housings are
polarized to help prevent
mis-mating.
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
105
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666