2042274-2 Datasheet, PDF (59/111 Pages) Tyco Electronics – Power Connectors & Interconnection Systems

Power Connectors & Interconnection Systems
AMPINNERGY Wire-To-Board Connectors
Product Facts
I Ratings: 600 VAC (RMS),
current ratings range from
12-35 Amps
I Receptacles polarized to
plug
I Receptacles and plugs
available in contact
configurations of 2 through
8 positions
I Vertical receptacle
polarized to PCB
I Receptacle contacts
have dual solder posts for
efficient heat dissipation,
low millivolt drop and
mechanical strength
I Receptacles may be
mounted on PCBs .062 to
.125 inch thick
I Plugs have positive
latching to receptacles
I Removable crimp contacts
latch firmly in plug
I Plugs are one-piece design
I Two ranges of crimped
contacts accommodate
either 10-12 AWG or
14-16-18 AWG conductors
I Recognized under the
Component Program of
Underwriters
Laboratories Inc., ^R
File No. E28476
I Certified by Canadian
R
Standards Association,
File No. LR7189-239
Technical Documents
Product Specification
108-1349 AMPINNERGY WTB
Connectors
Application Specification
114-6044 AMPINNERGY WTB
Connectors
Instruction Sheets
408-3236 Installation of AMPINNERGY
WTB Connectors
408-3198 Inspection of AMPINNERGY
Contacts
AMPINNERGY
Wire-To-Board (WTB)
Connectors
Connectors provide a con-
venient and efficient means
of delivering up to 600 VAC
to component printed
circuit boards and other
power distribution devices
in computers and peripher-
als, telephone systems
and appliances. The WTB
connectors also have auto-
motive and industrial appli-
cations.
Receptacles
The AMPINNERGY WTB
connector receptacles can
be installed on pc boards
varying in thickness from
.062 inch to .125 inch. A
polarizing pin is provided
on the vertical receptacle
assembly to aid in proper
positioning on the pc
board. Both the vertical
and right-angle assemblies
are polarized for accurate
mating to the plug assem-
blies. The receptacle
assemblies are available
in contact configurations
ranging from two to eight
positions.
Plugs
The single piece plug
housings are available in
contact configurations to
mate with the receptacles.
The plug is equipped with
positive latches to allow full
and more secure mating to
the respective receptacle.
A make-first/break-last
feature is designed into
position 1 of the plug
assemblies to provide
grounding protection.
Contacts
The crimp contacts will
accommodate either 10-
12 AWG or 14-16-18 AWG
conductors. The contacts
latch firmly within the plug
housing.
120
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666