2042274-2 Datasheet, PDF (30/111 Pages) Tyco Electronics – Power Connectors & Interconnection Systems

Power Connectors & Interconnection Systems
Crimp, Snap-In Contacts
Special Blind-Mate Drawer Connectors (Continued)
Material and Finish
Phosphor bronze, plated as follows:
Plating A — .000100-.000200
[0.00254-0.00508] tin (lubricant must
be used)
Plating B — .000030 [0.00076] min.
gold in mating area, gold flash on
remainder of contact, with entire contact
underplated .000050 [0.00127] min.
nickel
Plating C — .000015 [0.00038] min.
gold in mating area, gold flash on
remainder of contact, with entire contact
underplated .000050 [0.00127] min.
nickel
Plating D — .000030 [0.00076] min.
gold over .000050 [0.00127] min. nickel
in mating area, remainder of contact
gold flash over .000015 [0.00038] min.
nickel
Plating E — .000030 [0.00076] min.
gold in mating area, with entire contact
underplated .000050 [0.00127] min.
nickel
Plating F — .000015 [0.00038] min.
gold in mating area, with entire contact
underplated .000050 [0.00127] min.
nickel
Wire Barrel Crimp
Insulation Support
Terminal Stop
Locking Lance
Wire
Range
AWG/mm²
Insulation Range
Single
Wire
Double
Wire
26-22
0.12-0.4
.050-.064
1.27-1.63
—
22-18
0.3-0.9
.055-.080
1.40-2.03
.120
3.05
Max.
16
1.25-1.40
.108
2.74
Max.
.080-.160
2.03-4.06
Part Numbers
Contact
Loose
Piece
Strip
Form
Applicator for
Contact _{AMP-O-LECTRIC}
Finish
Machine*
Hand
Tool
583990-3 583204-2
B
—
343371-1
D
—
583361-2
A
583989-3 583361-3
B
583989-4 583361-4
C
—
583555-4
E
—
583555-6
F
583991-3
60151-6
B
466366-2
90028-3
90017-3 (1 #22-20)
466367-2 90028-3 (2 #22)
90101-3 (1 #20)
466368-2
90031-8 (2 #18)
90101-3 (2 #20)
90101-3 (1 #16)
*Applicators are for AMP-O-LECTRIC Model “K” machines. Consult Tyco Electronics for applicators for other bench
machines and lead-making machines.
Notes: 1. Shorting contacts are available, consult Tyco Electronics.
Notes: 2. Contacts and housings to accommodate .093 [2.36] thick PC boards can be made available, consult
Tyco Electronics.
Technical Documents
Product Specifications
108-9013, 108-9043
Application Specification
114-9003
Instruction Sheets
408-6591, 408-7045, 408-7622,
408-7623, 408-7624, 408-7625,
408-7626
Crimp Inspection Sheet
CI 8050-33
Dummy Contact
Material
Phosphor bronze
Technical Documents
Instruction Sheet 408-7037
Hand Crimping Tool
Contact Extraction Tool
Plain Finish—
Part Number 66084-1
Tin Finish—
Part Number 66084-2
Gold Finish—
Part Number 66084-3
Part Number
Extraction
Tool
Used with
Housings
465195-1
480110-2, -5
480142-2, -3
582140-5
582147-5
582264-2
582500-2
582963-2
583167-3
583280-1
583617-1
583680-1
583685-1
583722-1
583723-1
583724-1
583725-1
583726-1
465195-2
480133-2
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Note: All part numbers are RoHS compliant.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
91
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666