3-747579-4 Datasheet, PDF (62/66 Pages) Tyco Electronics – HDP-20 Crimp Snap-In Contact Connectors

AMPLIMITE Subminiature D Connectors
Hardware (Continued)
Slide Latch Clip
Assembly for
Unfiltered Mating Half
Material and Finish:
Screw, Washers and
Hex Nut—Cold rolled steel, zinc plated
clear chromate
Clip—Stainless steel
Technical Documents:
Instruction Sheet—408-7785
Plug or
Receptacle
(See Note 2.)
L
Screw
Clip
Style 1
Style 2
.165
[4.19]
Rolled Edge
Flat Washer
Kit Part Numbers:
Lock Washer
Hex Nut
Thread
Size
4-40
2-56
Screw
Length
L
.415
10.54
.547
13.89
Pkg.
Unit^†
Bulk
Unit
—
Screw
Style
1
2
Part
No.
5206942-1
5206942-2
5748078-1**
—
† _{Two assemblies per package.}
* Each part is individually bulk packed for multiple kit orders.
** Designed for cable clamps with mounting ears. No flat washers included.
Notes:
1. All parts are packaged unassem-
bled.
2. Slide Latch Clip Assemblies can
be used on any Subminiature D
AMPLIMITE HD-20 metal-shell
plug or receptacle.
3. Slide Latch Clip Assemblies mate
with Locking Post Assemblies
shown below.
Locking Post Assembly
A
B
Material and Finish:
All Parts—Cold rolled steel, zinc
plated clear or yellow chromate
Hex Nut
Related Product Data:
Part No. 206514-1
Connectors used with:
HDE Metal-Shell or All-Plastic—
pages 112-115
HDF Metal-Shell or All-Plastic—
pages 125 & 126
HDP Metal-Shell—pages 90-102
HD Board Mount—pages 54-71,
78-85, 87-89
Instruction Sheets—
408-6551
408-7785
Plug or
Receptacle
(See Note 2.)
Lock Washer
Post
Flat Washers
(See Note 4.)
Thread
Size
4-40
2-56
Locking
Post
Finish
Yellow
Chromate
Clear
Chromate
Yellow
Chromate
Yellow
Chromate
Dimensions
A
B
.410 .110
10.41 2.79
.410 .110
10.41 2.79
.560 .110
14.22 2.79
.615 .172
15.62 4.37
Locking Post Kit Number
(See Note 4)
Individual Bulk Packed*
5206514-1 5206514-3
5206514-4
—
5206514-6 5206514-7
5747242-1
—
*Each part is individually bulk packed for multiple kit orders.
Note: All part numbers are RoHS compliant.
B
A
Part No. 747242-1
Notes:
1. All parts are packaged unassem-
bled.
2. Each kit is comprised of two com-
plete assemblies, as illustrated
above.
3. For front panel mounting, it is rec-
ommended that a shim be used
between the connector flange and
panel to prevent bowing of the
flange.
4. Locking posts with 2-56 thread
size are to be used with cable
clamps with mounting flanges.
Locking posts with 4-40 thread
size can be used with all other
cable clamps
5. Locking posts mate with slide
latches (page 149).
151
Catalog 82068
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches and
millimeters unless otherwise
specified.
USA: [phone]
Canada: [phone]
Mexico/C. Am.: [phone]
Latin/S. Am.: [phone]
Germany: [phone]
UK: [phone]
France: [phone]
Netherlands: [phone]
China: [phone]