3-747579-4 Datasheet, PDF (11/66 Pages) Tyco Electronics – HDP-20 Crimp Snap-In Contact Connectors

Contact Size 20 DF
Pin Diameter .040 [1.02]
AMPLIMITE Subminiature D Connectors
HDP-20 Connector Contacts, Precision Formed
Crimp Snap-In
Contacts
Material and Finish:
Pin—Brass
Socket—Phosphor bronze
Plated
A—Select—Gold flash over nickel on
entire contact, with additional .000030
[0.00076] gold on mating end
B—Duplex—.000030 [0.00076] gold on
mating end, tin on termination end, with
entire contact nickel underplated
C—Gold flash over nickel on entire
contact
D—Duplex—Gold flash on mating end,
tin on termination end, with entire
contact nickel underplated
Related Product Data:
Performance Characteristics—
page 41
Connectors used with:
HDP—pages 92-97
Application Tooling—page 102
Technical Documents:
Product Specification—108-40005
Application Specifications—
114-10000
114-40030
Note: Instruction Sheets for TE Tooling
are packaged with the tooling. For
additional information call the Tooling
Assistance Center: 1-800-722-1111.
With Insulation Support
Pin
Socket
Wire Size
Range _{Ins. Dia.}
AWG ^Max.
[mm²]
Contact
Finish
(Plating
Code)
A
.040
B
1.02
C
28-24
0.08-0.2
D
A
.060
1.52
B
D
A
26-22 .040
B
0.15-0.4 1.27
C
D
A
24-20 .060
B
0.2-0.6 1.52
C
D
Contact Part Numbers
Pin
Socket
Strip Form Loose Form Strip Form Loose Form
Hand Tools for Loose Form Contacts
PRO-CRIMPER II
Hand Tool
CERTI-CRIMP II
Hand Tool
(Color Code)
Applicators*
for Strip Form
Contacts
66507-3 66507-9
66505-3 66505-9
1658540-4 1658540-5
66507-4 1-66507-0
1658538-2 —
66505-4 1-66505-0
58448-2
91503-1
(Blue Dot)
466423-4***
466901-1***
1658540-1 1658540-2 1658538-3 1658538-1
66682-2 66682-4
66683-2 66683-4
5066682-9
—
1-5066683-0 —
—
91549-1
(Black Dot)
466963-1***
5066682-6
—
5066683-7 —
745254-2 745254-6
745253-2 745253-6
1658544-2 1658544-1
745254-3 745254-7
1658543-2 1658543-1
745253-3 745253-7
—
91525-1
(Yellow Dot)
466968-1***
1658544-3
—
1658543-3 —
66506-3 66506-9
66504-3 66504-9
1658539-1 1658539-3
66506-4 1-66506-0
1658537-3 1658537-4
66504-4 1-66504-0
58448-2
91503-1
(Red Dot)
466422-4***
466900-1***
1658539-2 1658539-4 1658537-1 1658537-2
***For Part Nos. of Special Applicators and Applicators for other model machines, call the TE Tooling Assistance
Center at 1-800-722-1111.
***For use with AMP-O-LECTRIC Model “G” Terminating Machine.
***For use with AMP-O-MATIC Model II Stripper-Crimper Machine.
Without Insulation Support
Pin
Socket
Insertion/Extraction Tool
No. 91285-1
Instruction Sheet—408-9404
Wire Size
Range
AWG
[mm²]
28-24
0.08-0.2
24-20
0.2-0.6
Ins. Dia.
Max.
.068
1.73
.068
1.73
22-18
.068
0.4-0.8
1.73
Contact
Finish
(Plating
Code)
A
A
C
A
B
C
D
Contact Part Numbers
Pin
Socket
Strip Form
Strip Form
205310-2
205202-2
205202-6
745229-2
1658541-1
745229-5
—
205311-3
205201-3
205201-6
745230-2
1658542-2
745230-5
1658542-1
Hand Tools for
Loose Form Contacts
CERTI-CRIMP II
Hand Tool
(Color Code)
Applicators*
for Strip Form
Contacts
91548-1
(Blue Dot)
466903-1***
91548-1
(Red Dot)
466902-1***
91513-1
(Green Dot)
466996-1***
Note: Wire insulation diameter is limited by the connector housing cavity and clearance for the
insertion/extraction tool.
***For Part Nos. of Special Applicators and Applicators for other model machines, call the TE Tooling Assistance
Center at 1-800-722-1111.
***For use with AMP-O-MATIC Model II Stripper-Crimper Machine.
100
Catalog 82068
Revised 4-12
www.te.com
Note: All part numbers are RoHS compliant.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches and
millimeters unless otherwise
specified.
USA: [phone]
Canada: [phone]
Mexico/C. Am.: [phone]
Latin/S. Am.: [phone]
Germany: [phone]
UK: [phone]
France: [phone]
Netherlands: [phone]
China: [phone]