|
3-747579-4 Datasheet, PDF (53/66 Pages) Tyco Electronics – HDP-20 Crimp Snap-In Contact Connectors | |||
|
◁ |
AMPLIMITE Subminiature D Connectors
Shielded Cable Clamps (Continued)
Both the straight exit and
the 90° exit die cast RFI/EMI
shield allows cable to be fully
prepared and terminated to
the connector before the
shield is installed. During
installation, the shield of the
jacketed cable is folded
back and compressed into
the cable opening of the
RFI/EMI shield. For greater
cable support and/or
shielding effectiveness, split-
ring and crimp ferrules are
available (pages 143-145).
Straight Exit
RFI/EMI Die Cast Shield
for Jacketed Cable
(Two-Piece)
.620
[15.75]
HDE or HDP Plug or Receptacle
(Shown for Ref. only)
1.805
[45.85]
1.545
[39.24]
One-Piece Slide Latch
(Not Included)
Material and Finish:
ShieldâZinc alloy, plated nickel over
copper
4-40 Pan Head Screws & Latch
Screws (90° Exit Only)âSteel, zinc
plated
One-Piece Slide Latch (90° Exit
Only)âStainless steel
Related Product Data:
Ferrulesâpages 143-145
Connectors used with:
HDE Metal-Shellâpages 114 & 115
HDP Metal-Shell (Tin plated
only)âpages 90-102
Technical Documents:
Product Specificationâ
108-40032
Instruction Sheetâ408-6769
Shell
Size
No. of
Positions
2
15
ID
Letter
E
H
K
Cable
Dia.
w/Ferrules
.260-.300
6.60-7.72
.190-.375
4.83-9.53
.190-.430
4.83-10.92
*Cable Dia. Range using Grommet is .185-.320 [4.70-8.13].
Notes: 1. All parts packaged unassembled.
2. Each kit comprised of a two-piece shield with 2 pan head screws.
3. Split-ring and crimp ferrules are shown on pages 143-145.
90° Exit RFI/EMI
Die Cast Shields
for Jacketed Cable
(Two-Piece)
1.285
[32.64]
.629
[15.98]
HDE or HDP Plug or Receptacle
(Shown for Ref. only)
Part
Number
5745919-3
5745919-2
5745919-1
A
Grommet
Kit
â
747746-1*
â
One-Piece Slide Latch
(See Note 2.)
Shell
Size
Dimension
A
2
2.310
58.67
3
2.850
72.39
Cable
Dia.
w/Ferrules
.185-.225
4.70-6.48
.260-.300
6.60-7.62
.190-.375
4.83-9.53
.190-.430
4.83-10.92
.240-.280
6.10-7.11
.315-.355
8.00-9.02
.190-.430
4.83-10.92
.440-.480
11.18-12.19
.380-.530
9.65-13.46
Shield
with Slide Latch
Kit Numbers
(See Note 2)
5745652-4
5745652-3
5745652-2*
5745652-1
5745653-5
5745653-4
5745653-3
5745653-2
5745653-1*
Shield
without Slide Latch
Kit Numbers
(See Note 3)
â
â
â
â
â
â
5747194-3
â
â
Grommet
Kit
â
â
747746-1
â
â
â
â
â
747973-1
Note: All part numbers are RoHS
compliant.
142
* Cable Dia.with Grommet Kit: Size 2 = .185-.320 [4.70-8.13];Size 3 = .255-.470 [6.48-11.94].
Notes: 1.All parts are packaged unassembled.
2.Eachkit is comprisedofatwo-pieceshieldwiththreepanheadscrews andaslidelatchwithtwo4-40slidelatchscrews.
3.Each kit is comprised of a two-piece shield with three pan head screws.
4.Split-ring and crimp ferrules are shown on pages 143-145.
Catalog 82068
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches and
millimeters unless otherwise
specified.
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico/C. Am.: +52 (0) 55-1106-0800
Latin/S. Am.: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
|
▷ |