3-747579-4 Datasheet, PDF (50/66 Pages) Tyco Electronics – HDP-20 Crimp Snap-In Contact Connectors

AMPLIMITE Subminiature D Connectors
Unshielded Cable Clamps (Continued)
Material and Finish:
Straight Exit Dataphone
Cable Clamp Housing—
Nylon, black
B
4-40 Fillister Head Screws & Hex
Nuts—Steel, clear zinc plated
Jackscrews—Steel, black zinc plated
Metal-Shell HDP-20
Plug or Receptacle
(Shown for Ref. only)
Related Product Data:
Connectors used with:
HDP Metal-Shell—pages 90-102
A Max.
.770
[19.56]
Female Screwlock
(Order separately,
see page 144.)
Shell
Size
2
3
Dimensions
A
B
1.575 1.312
40.01 33.32
2.115 1.421
53.72 36.09
Max.
Cable Dia.
(without Gate)
.400
10.16
.500
12.70
Max.
Cable Dia.
(with Gate)
.200
5.08
.260
6.60
.320
8.13
.250
6.35
.340
8.64
.420
10.67
Cable Gate
Identification*
2A
2B
2C
3A
3B
3C
Thread
Size
Cable Clamp Kit No.
4-40
5745122-2
4-40
5745121-2
*Molded-in identification (as shown in chart above) is provided on cable support gates to facilitate proper selection with
regard to shell size and maximum acceptable cable diameter.
Notes: 1. All parts are packaged unassembled.
2. Cable diameter is adjustable by changing cable support gates.
Straight Exit for Jacketed
Cable (Two-Piece)
A
This cable clamp allows
B
cable to be fully prepared
and terminated to the
connector before the clamp
is installed.
1.920
C
[48.77]
Material and Finish:
Cable Clamps—ABS black
4-40 Fillister Head Screws and
Hex Nuts—Steel, zinc plated
4-40 Mounting Screws—Steel, zinc
plated
Jackscrews—Stainless steel,
passivated
Related Product Data:
Ferrules—pages 143-145
Connectors used with:
HDE Metal-Shell—pages 114 & 115
HDP Metal-Shell—pages 90-102
Other accessory capabilities:
Spring Latch (Two-Piece)—
page 152
Technical Documents:
HDE or HDP Plug
or Receptacle
(Shown for Ref. only) D
Cable Clamp Kits with Grommets
4-40 Male Jackscrew Kit Nos.:
747784-8 (bulk packed)*†
*Each part is individually bulk
packed for multiple kit orders.
†Slotted for screwdriver use.
Shell
Size
1
2
3
4
5
A
1.215
30.86
1.545
39.24
2.090
53.09
2.738
69.55
2.644
67.16
Dimensions
B
C
1.910
48.51
1.910
48.51
1.920
48.77
1.920
48.77
1.920
48.77
.570
14.48
.620
15.75
.680
17.27
.800
20.32
.900
22.86
D
.630
16.00
.620
15.75
.640
16.26
.620
15.75
.730
18.54
Cable
O.D.
Range
.185-.320
4.70-8.13
.185-.320
4.70-8.13
.255-.470
6.48-11.94
.255-.470
6.48-11.94
.255-.470
6.48-11.94
No. of
Grommets
Per Set
4
4
6
6
6
Notes: 1. All parts are packaged unassembled.
2. Jackscrews must be purchased separately.
3. Split-ring and crimp ferrules are shown on pages 143-145.
4. Shielded cable clamps will not accept connector housings with clinch nuts.
Kit Numbers
5748678-1
5748678-2
5748678-3
5748678-4
5748678-5
Instruction Sheet—408-6609
Note: All part numbers are RoHS compliant.
139
Catalog 82068
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches and
millimeters unless otherwise
specified.
USA: [phone]
Canada: [phone]
Mexico/C. Am.: [phone]
Latin/S. Am.: [phone]
Germany: [phone]
UK: [phone]
France: [phone]
Netherlands: [phone]
China: [phone]