3-747579-4 Datasheet, PDF (57/66 Pages) Tyco Electronics – HDP-20 Crimp Snap-In Contact Connectors

Commoning Strip
(for HDF-20 Plugs,
Size 20 Pin Contacts)
Material and Finish:
Brass, .004 [0.10] thick, tin plated
Part No. 206918-2
(Continuous Strip)
Related Product Data:
Used with HDF-20 Plugs—
page 126
AMPLIMITE Subminiature D Connectors
Hardware
HDF-20
Metal-Shell or
All-Plastic
Plug
(Shown for Ref. only)
.037
[0.94]
Dia.
Max.
.112
[2.84]
.108
[2.74]
.212
[5.38]
Max.
Notes:
1. Use punching tool to remove
undesired pin commoning
locations on commoning strip.
Use mating receptacle to seat strip
over pins in plug. Punching tool is
not supplied by TE.
2. Sold in strip form, strip contains
10,000 commoning locations.
Male Screw Retainers
for Metal-Shell
Connectors
(HDE and HDP)
Material and Finish:
Male Screw—Steel, zinc plated clear
or yellow chromate
Retaining Clip—.012 [0.31] stainless
steel
Related Product Data:
Connectors used with:
HDE Metal-Shell—pages 114 & 115
HDP Metal-Shell—pages 90-102
Technical Documents:
Instruction Sheet—408-7837
Metal-Shell
Plug or
Receptacle
(Shown for Ref. only)
Male Screw
A
Retaining Clip
See Note 4
.250
[6.35]
.280
[7.11]
Male Screw
A
Retaining Clip
(745136 Series)
See Note 6
.223
[5.66]
.185
[4.70]
Male Screw
Finish
Yellow
Chromate
Clear
Chromate
Thread Size
4-40
M3
(Metric)
4-40
Dimension
A
.220
5.59
.200
5.08
.225
5.72
.220
5.59
.200
5.08
Male Screw Retainer Kit No.
Individual
Bulk Packed*
5205980-1
5205980-3
5787354-1**
—
5745136-1
5745136-2
5207871-1
—
5205980-4
5205980-5
5745136-3
5745136-4
Note: All part numbers are RoHS
compliant.
*Each part is individually bulk packed for multiple kit orders.
** Phillips Head Screw
Notes: 1. All parts are packaged unassembled.
2. Each kit is comprised of two male screws and two retaining clips. Male screw retainers are also furnished
as part of cable clamp kits (pages 137 and 138).
Notes: 3. Male screw retainers mate with female screwlocks (page 144), with HDF metal-shell connectors featuring
4-40 threaded inserts (page 148) and with HD metal-shell board mount connectors featuring 4-40 threaded
inserts or female screwlocks.
Notes: 4. Retaining clip must be assembled onto connector flanges with threaded hole toward wire side of connector.
Notes: 5. All screws have straight slotted heads except where noted.
Notes: 6. Retaining clip must be assembled onto connector flanges with notched side of retainer toward mating side of
connector.
146
Catalog 82068
Revised 4-12
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches and
millimeters unless otherwise
specified.
USA: [phone]
Canada: [phone]
Mexico/C. Am.: [phone]
Latin/S. Am.: [phone]
Germany: [phone]
UK: [phone]
France: [phone]
Netherlands: [phone]
China: [phone]