3-747579-4 Datasheet, PDF (48/66 Pages) Tyco Electronics – HDP-20 Crimp Snap-In Contact Connectors

AMPLIMITE Subminiature D Connectors
Unshielded Cable Clamps (Continued)
Box and Lid Cable Clamps
can be used on either plugs
or receptacles and will not
interfere with commonly
used hardware. Their
hinged construction allows
easy assembly to a
harness. A wide range
of cable diameters are
accommodated through
the use of cable support
gates, supplied with each
cable clamp.
Cable clamps are available
in kits with appropriate
hardware for convenient
plug/receptacle mating.
See below for kits with
Male Screw Retainers.
Box and Lid
Straight/90° Exit
1.70
[43.18]
A Max.
B Max.
1.70
[43.18]
A Max.
B Max.
HDP Plug or Receptacle
(Shown for Ref. only)
Self-Tapping
Textured
Screw
Finish
Shell Size 1 & 2
HDP Plug or Receptacle
(Shown for Ref. only)
Cable Gates are inter-
changeable allowing
90° and 180° cable
exit. Blank gate shown
in 90° exit.
Typical Cable Support
Gate (Supplied with
Cable Clamp Kit)
Shell Size 3 & 4 & 5
Material and Finish:
Cable Clamp Housing—
Thermoplastic, black with textured finish
Gates—Thermoplastic, black
Flat Head Screws—Steel, black, zinc
plated
Related Product Data:
Connectors used with:
HDP Metal-Shell—pages 90-102
Other accessory capabilities:
Male Screw Retainers—
pages 146 & 147
Female Screwlocks—page 148
Locking Posts and Slide Latches—
pages 149-151
Spring Latches (Two Piece)—
page 152
Latching Blocks—pages 153 & 154
Technical Documents:
Instruction Sheet—408-7555
Material and Finish:
Shell
Size
1
2
3
4
Dimensions
A
B
.755
19.18
.630
16.00
1.078
27.38
.630
16.00
1.620
41.15
.770
19.56
2.268
57.61
.770
19.56
Cable Dia. Max. (Ref.)
Straight Cable Exit 90° Cable Exit
.160
.160
4.06
4.06
.320
.320
8.13
8.13
.390
.390
9.91
9.91
.640
16.26
.405
10.29
Cable Clamp Kit No.
Individual
Bulk Packed*
207467-1
207467-2
207470-1
—
207345-1
207345-2
207473-1
207473-2
5
2.178
55.32
.880
22.35
.490
12.45
.490
12.45
207476-1
—
*Each part is individually bulk packed for multiple kit orders.
Notes: 1. All parts are packaged unassembled.
2. Cable diameter is adjustable by changing cable support gates. Use the flat side of cable support gates for
discrete wire, and the semicircle side for jacketed cable.
Notes: 3. Cable clamp assemblies are available in kits with male screw retainers, see below.
Box and Lid Straight/90° Exit Cable Clamp Kits
with Male Screw Retainers
HDP Plug or
Receptacle
(Shown for
Ref. only)
Textured
Finish
Self-Tapping
Screw
Male Screws mate
with Female
Screwlocks
(See page 144.)
HDP Plug or
Receptacle
(Shown for
Ref. only)
Cable Clamp
(See Note 3.)
Cable Clamp Housing—
Thermoplastic, black with textured finish
Gates—Thermoplastic, black
Flat Head Screws—Steel, black, zinc
plated
Male Screw—Steel, zinc plated yellow
chromate
Retaining Clip—Stainless steel
Related Product Data:
Connectors used with:
HDP Metal-Shell—pages 90-102
Technical Documents::
Instruction Sheets—
408-7555
408-7837
Male Screws mate
with Female
Screwlocks
(See page 144.)
Shell Size 1 & 2
Male Screw
(See Note 2.)
Retaining Clip
(See Note 2.)
Shell Size 3 & 4 & 5
Shell
Size
1
2
3
4
5
Cable Clamp Kit No.
5207908-1
5207908-4
5207908-7
1-5207908-0
1-5207908-3
Notes: 1. All parts are packaged unassembled.
2. Each kit is comprised of a cable clamp and male screw retainer
hardware(2 each). Male screw retainers are also available in kit
form, see page 146.
3. For ordering cable clamps separately, see above.
Male Screw
(See Note 2.)
Retaining Clip
(See Note 2.)
Catalog 82068
Revised 4-12
www.te.com
Note: All part numbers are RoHS compliant.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches and
millimeters unless otherwise
specified.
USA: [phone]
Canada: [phone]
Mexico/C. Am.: [phone]
Latin/S. Am.: [phone]
Germany: [phone]
137
UK: [phone]
France: [phone]
Netherlands: [phone]
China: [phone]