3-747579-4 Datasheet, PDF (51/66 Pages) Tyco Electronics – HDP-20 Crimp Snap-In Contact Connectors

AMPLIMITE Subminiature D Connectors
Unshielded Cable Clamps (Continued)
Straight/90° Exit Cable
Clamps can be used on a
plug or receptacle and will
not interfere with commonly
used mating hardware. Their
three-piece construction
allows easy assembly to
a cable harness. Also,
the same cable clamp
components are used for
both straight and 90° cable
exit applications. This is
accomplished by simply
positioning the Male and
Female Panels on the Yoke
for the desired angle.
Material
Black thermoplastic
Straight/90° Exit
B
HDE or HDP
Plug or Receptacle (Ref.)
A
Straight Cable Exit
Application
.820
[20.83]
Related Product Data:
Connectors used with:
HDE All-Plastic—pages 112 & 113
HDE Metal-Shell—pages 114 & 115
B
HDP Metal-Shell—pages 90-102
Other accessory capabilities:
Female Screwlocks—page 148
Locking Posts and Slide Latches—
pages 149-151
Latching Blocks—pages 153 & 154
A
.820
[20.83]
90° Cable Exit
Application
140
Catalog 82068
Revised 4-12
www.te.com
Typical Cable Support Gate
(Supplied with Cable Clamp Kit)
Shell Size
3
4
Cable Clamp
Configuration
Straight Exit
90° Exit
Straight Exit
90° Exit
Dimensions
A
B
1.906
1.672
2.066
1.396
2.424
1.820
2.638
1.596
Cable
Dia.
.550
.750
Cable Clamp Kit No.
Individual
745306-1
745311-1
Notes: 1. All parts are packaged unassembled.
2. Each cable clamp assembly includes a yoke, male panel, female panel and four cable support gates.
The cable diameter is adjustable by changing the cable support gates.
Note: All part numbers are RoHS compliant.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches and
millimeters unless otherwise
specified.
USA: [phone]
Canada: [phone]
Mexico/C. Am.: [phone]
Latin/S. Am.: [phone]
Germany: [phone]
UK: [phone]
France: [phone]
Netherlands: [phone]
China: [phone]