1-146261-7 Datasheet, PDF (303/321 Pages) Tyco Electronics – AMPMODU Interconnection System

AMPMODU Interconnection System
For Board Mount
Receptacles and Machine
Applied Posts
Application Tooling (Continued)
Modular Insertion System
(MIS) Bench Machines,
217600 Series,
662820 Series (shown)
For Board Mount Receptacles
Bench machines for insert-
ing a variety of products
into pc boards. Uses the
same interchangeable
insertion heads as the
Comp-U-Sertor II Machines.
Series 217600 machines
feature a manually-operated
X-Y positioning fixture, plus
a locator spotlight. The
machine cycles when the
board hole is placed on the
anvil and both triggers on
the dual handles attached
to the X-Y fixture are
depressed. Series 662820
machines, without board
fixturing, cycle automatically
when the hole is properly
located. A stabilizing disk
over the anvil helps keep
the board level.
This benchtop insertion
machine installs contacts
into PC boards at rates to
2000 per hour. A spotlight
highlights the insertion area,
and lower tooling assures
precise board location.
The machine is activated
by a foot pedal.
Specifications
Width — 18 [457]
Depth — 24 [610]
Height — 18 [457]
Weight — 250 lb [113 kg]
Electrical — 120 to 220 VAC,
50 or 60 Hz (217600); 120 or
240 VAC, 60 Hz, single phase,
120 VA (662820)
Air — 80 psi [5.52 bar] min.,
15 scfm [0.00708 m³/s] min.
Insertable Area — 18 x 22
[457 x 559] max.
For more information, request
Catalog 296059.
P300 Automatic Insertion
Machine
Automatic machine for
inserting a variety of con-
tacts into pc boards (PCBs).
Equipped with an insertion
tool (comprised of a prod-
uct-specific insertion head,
an anvil, and a product feed
mechanism). Stepper-motor
driven X-Y table positions
PCBs under insertion head.
Surface Mount Equipment
Manufacturers Association
(SMEMA) compatible inline
PCB Insertion Station for
posts, tabs, receptacles or
sockets. Stand-alone unit is
field upgradeable to Pass
Through. Mounts up to four
TE pneumatic insertion
heads. Modem diagnostics
standard, vision system
optional. Control panel used
to program and monitor
entire insertion process.
Specifications
Width — 57.5 [1 460]
Depth — 64.5 [1 640]
Height — 60 [1 520]
Weight — Depending on
configuration
Electrical — 110 V, 60 Hz
Air — 87 psi [6 bar]
Insertable Area — 24 x 16
[600 x 400]
For more information, contact TE.
7
Note: All part numbers are RoHS
compliant.
Note: For additional tooling options, contact TE or reference the TE web site.
1307819
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
303
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666