1-146261-7 Datasheet, PDF (300/321 Pages) Tyco Electronics – AMPMODU Interconnection System

For Crimp Snap-In
Receptacles and Locking
Clip Contacts
AMPMODU Interconnection System
Application Tooling
Side-Feed Heavy-Duty
Miniature Applicators
(Coded HDM)
Interchangeable applicators
for crimping products reeled
side-by-side on single or
dual carrier strips (primarily
closed-barrel terminals and
open-barrel contacts).
Similar design as the end-
feed version. All side-feed
applicators include a wire
stop to help correctly
position the wire end in the
crimping target area.
For more information, request
Instruction Sheet 408-8040.
AMP-O-LECTRIC Model “G”
Terminating Machines,
354500-1, -9, -11
Semiautomatic bench
machines for crimping
reeled terminals and
contacts, featuring a quiet
and reliable direct motor
drive, microprocessor
controls for ease of setup
and operation, and guarding
and lighting designed for
operator convenience and
safety. All models are
equipped with either manual
or automatic precision
adjustment of crimp height.
Machine-mounted sensors
are available for crimp
quality monitoring using
conventional miniature-style
applicators.
Specifications
Width — 18.7-25.3 [475-643]
depending on applicator type
Depth — 21.5-28.1 [546-713]
depending on applicator type
Height — 20 [508]
Weight — 240 lb [110 kg]
Electrical — 120 or 220 VAC, 50
or 60 Hz; 310 VA
Air — 90-110 psi [6.21-7.59 bar],
6 scfm [0.00282 m³/s] when
required with air-feed applicators
Wire Range — 26-10 AWG
[0.12-6 mm²] solid or stranded,
depending on product applied
For more information, request
Catalog 65828, Video 198116,
Catalog 82275 [Crimp Quality
Monitor (CQM)], Video 198094.
7
AMPOMATOR CLS IV+
Lead-Making Machines,
356500-1, -2, 1213400-1, -2
Fully-automatic machines
that measure, cut, strip and
terminate single leads.
Microprocessor-controlled,
and programmed and
operated using an easy-to-
follow, menu-driven
touchscreen. Features
include direct-drive
terminating units with
precision crimp height
adjustment, fully
programmable setups, wire
runout and splice detection,
and motorized pre-feed with
wire straightener. Crimp
quality monitoring is also
available.
Specifications
Width — 159 [4 040]
Depth — 68 [1 730]
Height — 86 [2 185] with
24 [610] dia. reel
Weight — 2 000 lb [907 kg]
Electrical — 220 VAC, 50 or
60 Hz, single phase, 25 A, with
neutral and ground
Air — 90 psi [6.21 bar], 15 scfm
[0.0071 m³/s] sustained
Wire Range — 26-10 AWG
[0.12-6 mm²] stranded, 26-16 AWG
[0.12-1.4 mm²] solid
Lead Lengths — 3-90
[76.2-2 285], 90-1 000
[2 285-25 400] with long lead
conveyors
For more information, request
Catalog 124324, Video 198142
(NTSC), 199609 (PAL).
Note: All part numbers are RoHS
compliant.
Note: For additional tooling options, contact TE or reference the TE web site.
300
1307819
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666