1-146261-7 Datasheet, PDF (288/321 Pages) Tyco Electronics – AMPMODU Interconnection System

7
AMPMODU Interconnection System
Mod I Receptacle Assemblies, Horizontal Board Mount,
.031 x .062 [0.79 x 1.57] Centerline
Single Row .156 [3.96]
Centers
Material and Finish
Housing — Black thermoplastic, 94V-0
rated
Contacts — Copper alloy, plated as
follows:
Plating A — Selectively plated
.000030 [0.00076] gold contact area,
with gold flash over .000050 [0.00127]
nickel on entire contact
Plating B — .000079 [0.00201] min.
tin on entire contact
The letter A stamped
on contact indicates
mating end of recep-
tacle.
B
±.015
[±0.38]
A
.156
[3.96] ^Typ.
.046
[1.17]
Contact
Area
.182
[4.62]
.145
[3.68]
.018
[0.46]
X-X
.333±.010
[8.46±0.25]
Post Entry
Type C
Related Product Data
Mates with —
Machine Applied Posts — page 294
Headers — pages 295-297
Performance Specifications —
page 305
Technical Documents —
page 305
Recommended Board
Layouts for Receptacle
Assemblies and Individual
Receptacles (Type C)
H
±.003
[±0.08]
X
X
.175±.007
[4.45±0.18]
.300±.003
[7.62±0.08]
±.003
2H _[±0.08]
2H
±.003
[±0.08]
.055±.005
[1.40±0.13]
[ ] ^.340
+.005
-.000
[8.64+0.13]
H
±.003
[±0.08]
2H
±.003
[±0.08]
[ ] ^.340
+.005
-.000
[8.64+0.13]
H
±.003
[±0.08]
.100
[2.54]
Max.
[ ] ^.340
+.005
-.000
[8.64+0.13]
Keying Plug
.073±.003
[1.85±0.08]
Typ. Dia.
This configuration recommended
for use with machine applied posts
or headers with a .405 [10.29]
minimum mating end post length.*
.073±.003
[1.85±0.08]
Typ. Dia.
This configuration recommended
for use with machine applied posts
or headers with a .345 [18.76]
minimum mating end post length.*
.073±.003
[1.85±0.08]
Typ. Dia.
This configuration recommended
for use with machine applied posts
or headers with a .500 [12.70]
minimum mating end post length.*
The mating post length is depicted by the A dimension on page 294 (machine applied posts) and the C dimension on
pages 295-297 (headers).
H-Receptacle centers may vary depending on requirements. For individual receptacles, minimum nominal centerline
spacing between adjacent receptacles is .125 [3.18] for receptacle assemblies, centerline spacing between adjacent
receptacles is .156 [3.96]. The .003 [0.08] tolerances are not to accumulate over length of board.
Part No. 86181-2
(Use in Board Mount
Receptacles)
Note: All part numbers are RoHS compliant.
288
1307819
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666