1-146261-7 Datasheet, PDF (198/321 Pages) Tyco Electronics – AMPMODU Interconnection System

AMPMODU Interconnection System
Headers, Straight Post, Double-Row, .100 x .100 [2.54 x 2.54] Centerline
Solder Posts and
ACTION PIN Posts
(with Pin Protection
and Guide Pins)
.100
[2.54]
Pos.
Ref.
123
.065
[1.66]
R
(2 Plc.)
.515
[13.08]
5
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Posts — Phosphor bronze, plated as
follows:
Plating A — Duplex plated .000030
[0.00076] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
Plating B — Duplex plated .000015
[0.00038] gold on contact area,
.000100-.000200 [0.00254-0.00508]
matte tin on termination end, with entire
post underplated .000050 [0.00127]
nickel
Plating C — Selectively plated .000030
[0.00076] gold on contact area and
.000015 [0.00038] gold on termination
end, with gold flash over .000050
[0.00127] nickel on entire post
.085
.200
[2.16]
[5.08]
.040
B
[1.02]
(4 Sides)
A
.110
[2.79]
.440
[11.18]
.130
[3.30]
(2 Plc.)
.200
[5.08]
(Localized
Gold Plate
Area)
.320
[8.13]
.130
[3.30]
Board Retention Tails
(where indicated)
.180
[4.57]
.090
[2.29]
.100±.003
[2.54±0.08]
.040±.003
[1.02±0.08]
(Finished Hole)
.100±.003
[2.54±0.08]
Recommended PC Board Hole Layout
(for .055 [1.40] min. thick PC board)
.0453±.001
[1.02±0.03]
(Drilled Hole)
Tolerances not to accumulate within one connector pattern.
.180
[4.57]
.025 [0.64] Square
Board Retention Tails
Related Product Data
Mateable Receptacles —
pages 195, 196
Performance Specifications —
page 194
ACTION PIN Posts —pages 150, 151
Application Tooling —pages 152
Technical Documents — page 276
Product Specification
108-25017
Application Specification
114-9009
Additional header sizes are
available; minimum order
quantities may apply. Consult TE.
No. of
Pos.
12
14
16
20
24
30
36
40
50
60
70
72
80
86
90
96
100
110
120
130
200
Dimensions
A
B
.980 [24.89]
1.080 [27.43]
1.180 [29.97]
1.380 [35.05]
1.580 [40.13]
1.880 [47.75]
2.180 [55.37]
2.380 [60.45]
2.880 [73.15]
3.380 [85.85]
3.880 [98.55]
3.980 [101.09]
4.380 [111.25]
4.680 [118.87]
4.880 [123.95]
5.180 [131.57]
5.380 [136.65]
5.880 [149.35]
6.380 [162.05]
6.880 [174.75]
10.380 [263.65]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.900 [22.86]
1.100 [27.94]
1.400 [35.56]
1.700 [43.18]
1.900 [48.26]
2.400 [60.96]
2.900 [73.66]
3.400 [86.36]
3.500 [88.90]
3.900 [99.06]
4.200 [106.68]
4.400 [111.76]
4.700 [119.38]
4.900 [124.46]
5.400 [137.16]
5.900 [149.86]
6.400 [162.56]
9.900 [251.46]
Header Part Nos. with .180 [4.57] Tail Length
Standard Solder Tails
Board Retention Tails
Plating A Plating B Plating A Plating B
5-102692-1 5-102567-1 6-534978-6 5-534257-5
—
7-102567-3
—
—
6-102692-5
—
5-534978-2 6-534257-4
6-102692-6 6-102567-1 5-534978-3 5-534257-6
5-102692-2 5-102567-2 5-534978-4 5-534257-7
6-102692-7 6-102567-3 5-534978-5 5-534257-8
5-102692-3 5-102567-3 5-534978-6 5-534257-9
6-102692-3 6-102567-2 5-534978-7 6-534257-0
5-102692-4 5-102567-6 5-534978-8 6-534257-5
5-102692-5 5-102567-4 5-534978-9 6-534257-1
6-102692-4 6-102567-0 6-534978-5 6-534257-2
6-102692-8 6-102567-6 6-534978-0
—
5-102692-6 5-102567-8 6-534978-1 5-534257-1
6-102692-9 6-102567-7
—
—
6-102692-2 6-102567-4
—
—
5-102692-7 5-102567-5 6-534978-7
—
5-102692-8 5-102567-9 6-534978-8 5-534257-2
6-102692-0 6-102567-5 6-534978-2
—
5-102692-9 5-102567-7 6-534978-3 5-534257-3
7-102692-0 6-102567-9 6-534978-9
—
6-102692-1 7-102567-1 5-534978-1 6-534257-9
Note: Headers with make first/break last posts can be made available, consult TE.
198
1307819
CIS WR 08/2011
te.com
Note: All part numbers are RoHS compliant.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666