1-146261-7 Datasheet, PDF (298/321 Pages) Tyco Electronics – AMPMODU Interconnection System

AMPMODU Interconnection System
Locking Clip Contacts for .031 x .062 [0.79 x 1.57] Posts,
.031 x .062 [0.79 x 1.57] Centerline
Wire Crimp Contacts with
Insulation Support
Material and Finish
Contact Body — Phosphor bronze,
plated as follows:
Plating A — Selectively plated
.000015 [0.00038] gold on contact area,
with gold flash over .000050 [0.00127]
nickel on entire post
Plating B — .000100 [0.00254] min.
tin over .000050 [0.00127] nickel on
entire contact
Contact Spring — Stainless steel
Related Product Data
Mate with —
Machine Applied Posts — page 294
Headers (.500 Post Height Only) —
pages 295-297 (see recommended post
length below)*
Housings used in — page 299
Application Tooling —
pages 300-304
Performance Specification — page
305
Technical Documents —
page 305
Mating Post
Spring
Body
Wire Size
Range
AWG [mm²]
22-18 [0.3-0.9]
Ins. Dia.
Range
.050-.0100 [1.27–2.54]
Finish
Plating A
Plating B
Contact Part Nos.
Strip Form
87269-2
5-87269-1
Loose Piece
87278-2
5-87278-1
Wire Size
Range
AWG [mm²]
22-18 [0.3-0.9]
Part
Number
466007-2
466950-2
Applicator
Type
Used With
Machine
HDM
SCA
Model "K" (AMP-O-LECTRIC)¹
Stripper/Crimper (AMP-O-MATIC)
Premium
CERTI-CRIMP
Hand Tool
Part Number
90308-1
1_{AMP-O-LECTRIC KII Machine. Applicators also available for AMPOMATOR Lead Making Machines. Consult TE.}
Note: These contacts must be crimped in accordance with TE Specification No. 114-25008 in order to function
properly in a connector housing.
Extraction Tool Part No. 91104-1 is used for removing individual contacts from connector housings and for detaching
contacts from mating posts.
Extraction Tool
Part No. 91104-1
Instruction Sheet
408-7678
7
298
1307819
CIS WR 08/2011
te.com
Wire Harnessing
If necessary, wires can be
grouped with cable ties and
secured to a panel with
fixed clamps. However,
locking clip contacts must
be free to float within the
connector housings to
allow proper extraction.
Therefore, harnessing
hardware or the use of
multiple terminations per
contact must not restrict
the free-floating action of
contacts in the housing. For
more information, request
Insulating and Bundling
Products Catalog 124132.
Fixed
Clamp
Cable
Tie
Unrestricted
Wire for
Free-Floating
Contacts
.281/.344* [7.14/8.74]
(without housing)
.370/.433* [9.40/11.00]
(with housing)
*Dimension defines .031 x .062 [0.79 x 1.57] portion of post.
If post is longer than maximum specified, post tip may butt against wire ends.
Note: All part numbers are RoHS compliant.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666