1-146261-7 Datasheet, PDF (139/321 Pages) Tyco Electronics – AMPMODU Interconnection System

AMPMODU Interconnection System
Straight-Thru, 4-Sided
.025 [0.64] Sq. Posts
Pin Header
with Latches
Universal Ejection Style Pin Headers, Military, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centers
.253
[6.43]
.150
[3.81]
.336 .315
[8.53] [8.00]
.100
[2.54]
.165
[4.19]
.190
[4.83]
.240
[6.10]
.100
[2.54]
.025
[0.64]
Position No.1
Indicator
•
.549
[13.94]
.150 _.050
[3.81] _[1.27]
A
B
C
.025
[0.64]
.025 ^.107
[0.64] ^[2.72]
.289
[7.34]
.096
[2.44] ^Dia.
2 Plc.
.106
[2.74]
E
Solder Tail
Typ.
Pin Header
without Latches
Material and Finish
Housing & Latches — Black
thermoplastic, 94V-0 rated
Contacts — Brass or phosphor bronze
(at TE’s option); Duplex .000030
[0.00076] gold on mating end, .000100
[0.00254] min. tin on termination end,
with entire contact underplated .000050
[0.00127] nickel
Related Product Data
Electrical Characteristics —
page 134
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles — page 220
Mounting Information
4-24 self-tapping screws
and 2-56 bolts and nuts are
available for mounting
straight-thru pin headers of
pc boards. Typical applica-
tions and part nos. for
ordering this hardware are
presented below.
Note: Used with Header (optional)
D
.195
Latch (sold separately)
[4.95]
Part Number 1825851-1
No. of
Positions
10
14
16
20
24
26
34
40
50
A
.700
17.78
.900
22.86
1.000
25.40
1.200
30.48
1.400
35.56
1.500
38.10
1.900
48.26
2.200
55.88
2.700
68.58
B
1.100
27.94
1.300
33.02
1.400
35.56
1.600
40.64
1.800
45.72
1.900
48.26
2.300
58.42
2.600
66.04
3.100
78.74
Dimensions
C
1.260
32.00
D
.860
21.84
1.460
37.08
1.060
26.92
1.560
39.62
1.180
29.46
1.760
44.70
1.360
34.54
1.960
49.78
1.560
39.62
2.060
52.32
1.660
42.16
2.460
62.48
2.060
52.32
2.760
70.10
2.360
59.94
3.260
82.80
2.860
72.64
E
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
.110 [2.79]
.155 [3.94]
Part Number
(Without Latches)
5102154-1
5102156-1
5102154-2
5102156-2
5102154-3
5102156-3
5102154-4
5102156-4
5102154-5
5102156-5
5102154-6
5102156-6
5102154-8
5102156-8
5102154-9
5102156-9
1-5102154-0
1-5102156-0
Notes: 1. Pin headers in 10- and 14-position sizes have only one slot for snap-in polarizer (military polarization),
located as shown.
Notes: 2. Pin headers in 10-position size have only slot for dual polarization, located as shown.
Latch
(See Note at left.)
2-56
Bolt & Nut
(2 Each Req‘d.)
Note: 2-56 bolts and nuts may be
used to mount pin headers with and
without latches. If latches are to be
used, the bolts must be positioned in
the pin header before the latches are
installed.
4-24
Self-Tapping
Screw
(2 Req‘d.)
.256
[6.50]
Note: All part numbers are RoHS
compliant.
Pin Header Mounting using 4-24 Self-Tapping Screws:
Part No. 19156-1 (for .062 [1.57] Thick PC Board)
Part No. 19156-2 (for .093 [2.36] Thick PC Board)
Part No. 19156-3 (for .125 [3.18] Thick PC Board)
Pin Header Mounting with 2-56 Bolts and Nuts:
Part No. 746383-1 (Bolt Only)
Kit No. 102198-1 (Bolt and Nut, 2 Each per Kit)
139
1307819
CIS WR 08/2011
te.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
L. & S. America: 54-11-4733-2200
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
UK: 44-800-267-666
5